New Vinyl Floor

[d4ngermouse]

I am planning to replace the floor of my camper, its a bit tatty and the person who fitted it fixed it didn't cut it straight by the door and then just screwed it down. I was planning to put a strip of metal down or something to keep it nice at the edge but I just wandered if there was somthing like this available already or if its something i'm going to have to make.

[VWCamperfan]

Most DIY stores sell an edging of some description. You should be able to get hold of straight metal or angled. Usually it is alluminium but you can get brass coloured as well.

[tonymolloy]

i used the original carpet trim which was civered in plastic,removed the plastic,polished the aluminium then after i tiled the floor put another aluminium edging over the top.