Thanks for the info, the wheels already have tyres on (not bad condition), the fronts are 205x55 R16 91V, rears 225x50 R16 92V. I've checked the load ratings and they are 615 & 630Kg respectively. I'm not sure what the minimum load rating should be for a T25? Any clues?
Cheers
Merc Alloys 16" 8J's
Moderators: User administrators, Moderators
- Yozza
- Registered user
- Posts: 45
- Joined: 15 Oct 2008, 19:28
- 80-90 Mem No: 6195
- Location: Stoke-on-Trent
Re: Merc Alloys 16" 8J's
T25 '90 2.1i 16" Doka
JCB 3C MkII
Thwaites 6000
JCB 3C MkII
Thwaites 6000
-
- Registered user
- Posts: 201
- Joined: 14 Oct 2005, 16:25
- 80-90 Mem No: 0
- Location: bedfordshire UK /Barcelona Spain
Re: Merc Alloys 16" 8J's
some would run them. but it depends..
is it a van or a camper, top on it? etc..
personaly they are too low rated, but i have run those sizes/load rates a good few years ago.
the other thing is they are smaller overall diemater than the orignal tyres.
if they are good tyres you could posibly seel them on ebay and put the money to higher rated ones.
is it a van or a camper, top on it? etc..
personaly they are too low rated, but i have run those sizes/load rates a good few years ago.
the other thing is they are smaller overall diemater than the orignal tyres.
if they are good tyres you could posibly seel them on ebay and put the money to higher rated ones.
WHY T3's.... because they are just so adictive, and having one just aint enough