Hi,
Have my 2.5 litres of Rustoleum and am about to do the job.
Bearing in mind it has to be thinned, and the roller trays don't hold that much, is it suggested that I say mix a litre or so with say 15% of white spirit and then top up the roller tray from this ?
Any thoughts about this or the practicalities of mixing in the proportions required would be most useful from those of you who have been down this road before.
Cheers
Dave
Re - Painting using Roller
Moderators: User administrators, Moderators
Have a read through this and check on wiki
https://club8090.co.uk/forum/viewtopic.php?t=18751
Mixing it I think comes down to preference and finish, more and thinner coates I think you will find, where as thicker will stick / cover faster but will not give you give as good a finish.
Again read through, prep it properly, tac cloth it, take your time and possibly have a practice first on an old panel.
Take photos so I/we can see how it goes.
Have fn Kris
https://club8090.co.uk/forum/viewtopic.php?t=18751
Mixing it I think comes down to preference and finish, more and thinner coates I think you will find, where as thicker will stick / cover faster but will not give you give as good a finish.
Again read through, prep it properly, tac cloth it, take your time and possibly have a practice first on an old panel.
Take photos so I/we can see how it goes.
Have fn Kris
Its not broke? fiddle with it until it is, then you can fix it
Oh and the name is pronounced CRISIS
CS/JK/CS 1.6 diesel on a DY/DY/DU 4 speed box (3rd engine & gearbox now fitted)
07704 771 285
aka Mr Cortisone
Oh and the name is pronounced CRISIS
CS/JK/CS 1.6 diesel on a DY/DY/DU 4 speed box (3rd engine & gearbox now fitted)
07704 771 285
aka Mr Cortisone
