interior rebuild

Post by **Iceworx** » 04 Sep 2008, 15:45

Im rebuilding the interior from scratch. Fabricating the cabinets etc isnt a problem. I can do that

What I need some advice on, is a finish for them or a surface if you like.

I want it to look really smart and be pretty hardwaring.

Ideally a big roll of iron on laminate would be superb, but I cant seem to find anywhere.

Or should I paint it? what sorta prep work and paint should I use?

any advice / links / pointers will be very gratefully recieved.

Post by **AngeloEvs** » 04 Sep 2008, 16:27

Laminate is available from places like this

http://www.topclasscarpentry.com/product/14735/

Painting is an option but if done badly looks tacky. Its all down to how much work you are prepared to put into the prep and finish. If you are going to all the trouble of making new units then I would laminate the surfaces. I like the 'westy look' with plain light colours (in small spaces) and these should be cheaper than immitation wood grain. Do a search on google for laminates. You can get 3mm lightweight Laminate board but it is very expensive in my opinion. Look here

http://www.rainbowconversions.co.uk

Post by **CycloneMike** » 04 Sep 2008, 16:45

For the type of laminate that is on your kitchen worktop try
http://www.plasticsandveneers.co.uk/
I have been in the Brampton depot and there are hundereds of designs in sheets about 1mm thick, which would need to be stuck onto your boards with contact adhesive.

For self adhesive vinyl, try these people, they have loads in bigger sizes. Some is supposed to be suitable for covering kitchen doors etc.
http://search.stores.ebay.co.uk/vinylde ... 74QQsofpZ0

Use either with lipped 'T' edging trim to finish off and they would look very proffessional. Obviously the plastic laminate will be stronger, but the vinyl is cheeper and quite strong too and easily repaired.

Post by **AngeloEvs** » 04 Sep 2008, 17:02

Fab link that Cyclone, Know where to go myself now for a wide range of finishes. Problem with the Vinyl is that it shrinks and wrinkles in hot weather, (probably last for centuries the way our summers are going!)

Post by **Iceworx** » 04 Sep 2008, 17:32

I run my own vinyl company! and i never even thought about trying that!

I shall see what my suppliers can rustle up!

Post by **colinMSC** » 05 Sep 2008, 00:58

I'm

.com are you

Why didn't you think of that first, you must be surround by the stuff

Post by **Iceworx** » 05 Sep 2008, 08:22

I guess its becuase I have a pretty clear ideal of what I want it to look like when finished. And all the rolls of material I have are plain colours

Post by **Westy.Club.Joker** » 05 Sep 2008, 08:43

Look up Vohringer Board, that`s the stuff that the pro`s use for cabinets, it`s ultra-lightweight ply board with a proper finish on it.

Some here, but google it yerself for info

www.camper-parts.net/catpage.php?page=24

Post by **jonno** » 05 Sep 2008, 08:44

This place maybe able to help
I got all my boarding from them and there only in Oldham.
http://www.hpponline.co.uk/

Jonno

Post by **Iceworx** » 05 Sep 2008, 10:49

Spot on, thanks guys