1Y using a 1.6d pump.

Alternative power-plants and transplants (GTi, Porsche, Subaru, Audi, diesel etc). Discussion and Q&A last answered over 2 years ago.
You may also want to visit the Wiki(pedia) for a more structured index of T25 repair, maintenance, technical and ownership topics.

Moderators: User administrators, Moderators

Locked
User avatar
SplendiferousII
Registered user
Posts: 178
Joined: 01 Aug 2006, 08:09
80-90 Mem No: 2893
Location: Membership No 2893 Cornwall / Gloucestershire

1Y using a 1.6d pump.

Post by SplendiferousII »

I fitted a 1Y engine into my van a while ago to replace the stock 1.6d. Works well and goes much better. But the economy has suffered. I was getting up to 50mpg with the old unit and am now down in the low 30's.

I am thinking to stick the old 1.6 pump on the 1Y engine and see if this helps (ok I might lose a bit of power) I did fit and run this pump when I installed the 1Y and it ran up ok (it would not rev but I found the reason)

I know some guys on here use the 1.6 pump on a 1Y how do you find the economy / Power.

User avatar
ringo
Trader
Posts: 2245
Joined: 14 Oct 2005, 05:41
80-90 Mem No: 1375
Location: Nottingham

Post by ringo »

My MPG suffered when going to the 1Y (would have thought it got better - but there you go).

I have found that reducing my speed from 65-70 to 55-60ish has made a huge difference. Just a tad dull.

Will be interested to here about the pump swap....

Ringo
Now driving a big bad VW LT Florida.

camper
Registered user
Posts: 357
Joined: 30 Oct 2005, 20:26
80-90 Mem No: 1710
Location: Bookham Surrey

Post by camper »

I fitted a 1Y engine recently and am getting good mileage aprox 40mpg.The van was a 1.6td so i needed to get inlet&exhuast manifolds to run it normal asparated.I used a 1.6n inlet and airbox used the 1Y exhaust manifold and fabricated the 1.6td down pipe to fit.The down pipe then fits to the existing 1.6td exhaust box.Could the good mpg be down to the 1Y exhaust manifold set up.Oh timing is spot on. http://www.vwdieselparts.com/forum/index.php on this site there are topics that discribe using 1.6n injection pumps on 1.9 engines.

Locked