Fusebox terminals

Post by **Syncro G** » 08 May 2008, 19:47

The crimp bits that go in the round pinned plastic multiplugs behind later (blade) fuseboxes. Anyone know where they can be aquired from? I suspect VWP would do them but which ones are they? Anyone done some rewireing? I like tidy wireing!

There seems to be a couple of pin sizes, I'd be after both. If the answer is as obveous as "try VW" then I will IF I can have a part number - they sell the plastic plugs easy enough but they don't come with terminals and I'm too stupid to be able to find them!

Post by **bigherb** » 08 May 2008, 20:15

I get them here.
http://www.vehicle-wiring-products.eu/V ... gterms.php

Mike

Post by **Syncro G** » 09 May 2008, 11:11

bigherb wrote:I get them here.
http://www.vehicle-wiring-products.eu/V ... gterms.php

Mike

But my point is, WHICH ONES ARE THEY? - What product code do I ask for. Someone mush have needed some in the past. (my original message already said they probubly do them

)

Post by **T'Onion** » 09 May 2008, 11:27

Glen
I've got a spare fuse box that you could borrow and go to maplins and match up the bits you need .. i may even have the connectors kick about

Post by **VWlewis** » 09 May 2008, 15:34

You can get them from VW Spares department - small ones are 1.5 mm and the larger ones 4mm if I recall correctly. VW sell them with a short length of wire attached so easy to fit. As for part numbers... well they are general spares not just T25 specific so you'll need to get the VW Parts person to search their system for them.

See here for some pics of the fusebox and information on wiring.

http://wiki.80-90.co.uk/index.php/VW_Electrics_fuse_box