Fridge removal again

Post by **gti mad man** » 15 Apr 2008, 18:50

Read some previous threads and one in wiki though fridge is different mines a rm212

'Ive undone the 2 screws either side in cuboards

ive undone the control facia whats next?

Post by **Mocki** » 15 Apr 2008, 21:54

remove the out flu vent, and turn the gas off at the cylinder, then disconnect the gas at the fridge, pull it out and disconnect the electrics......

and polish it, put it back?

Post by **gti mad man** » 15 Apr 2008, 22:09

Mocki wrote:remove the out flu vent, and turn the gas off at the cylinder, then disconnect the gas at the fridge, pull it out and disconnect the electrics......

and polish it, put it back?

haha

Gas is off there seems to be 3 copper pipes goign to top of fridge all of them?

I assume the outlet flue is the white one not the metal"electrolux" one

Post by **Mocki** » 15 Apr 2008, 23:10

gti mad man wrote:
Mocki wrote:remove the out flu vent, and turn the gas off at the cylinder, then disconnect the gas at the fridge, pull it out and disconnect the electrics......

and polish it, put it back?

haha
Gas is off there seems to be 3 copper pipes goign to top of fridge all of them?

I assume the outlet flue is the white one not the metal"electrolux" one

how the feck can i tell you that, i cant see your van from here?

the flu normally outlets at a 2x3 square ally electrolux plate, and the main gas pipe in only, the other two are likely to be one to the jet from the on/off/ temp control, and the thermo sensor, thin pipes

Post by **gti mad man** » 16 Apr 2008, 08:08

cheers will give it a go