temp gauge
Moderators: User administrators, Moderators
temp gauge
Hi all. does the coolant warning light also warn of over heating. My temp gauge isn't working, is this easy to fix or can i rely on warning light. 1986, 1915, wc transporter
Never sure where I'm going till i get there.
Re: temp gauge
jpee,
The coolant warning light does warn of over heating IIRC but I far as I know it will only work if the sender and wiring are OK.
The other function of the light is low coolant level and this is triggered by a separate circuit and switch.
Personally I would sort out the temperature gauge, could save a lot of grief and lolly in the long run. Lots of threads on the subject on this forum.
Basically faults are... gauge itself........ wiring (specially at the multi pin plug connecting to the flexy printed circuit on the dash instruments),....... and the sender, on the thermostat housing.
More info HERE
Mike
The coolant warning light does warn of over heating IIRC but I far as I know it will only work if the sender and wiring are OK.
The other function of the light is low coolant level and this is triggered by a separate circuit and switch.
Personally I would sort out the temperature gauge, could save a lot of grief and lolly in the long run. Lots of threads on the subject on this forum.
Basically faults are... gauge itself........ wiring (specially at the multi pin plug connecting to the flexy printed circuit on the dash instruments),....... and the sender, on the thermostat housing.
More info HERE
Mike
'Two 'eads is better'n wun even if mine's a sheeps'
Grun
Member Number 1250
D reg 2.1 DJ autosleeper poptop
Grun
Member Number 1250
D reg 2.1 DJ autosleeper poptop
Re: temp gauge
Grun wrote:jpee,
The coolant warning light does warn of over heating IIRC but I far as I know it will only work if the sender and wiring are OK.
The other function of the light is low coolant level and this is triggered by a separate circuit and switch.
Personally I would sort out the temperature gauge, could save a lot of grief and lolly in the long run. Lots of threads on the subject on this forum.
Basically faults are... gauge itself........ wiring (specially at the multi pin plug connecting to the flexy printed circuit on the dash instruments),....... and the sender, on the thermostat housing.
More info
HERE
Thanks Mike
Light working ok flashing on ignition then stays off will get wiring checked
Mike
Never sure where I'm going till i get there.