Rear wheel studs

All things round and their alignment to your direction of travel

Moderators: User administrators, Moderators

Locked
User avatar
mininut
Registered user
Posts: 1686
Joined: 13 Oct 2006, 20:25
80-90 Mem No: 3031
Location: Glenluce, Newton Stewart. SW Scotland.
Contact:
Contact mininut

Rear wheel studs

Post by mininut »

My rear wheel studs have 25mm of thread protruding from the drums. Are these standard studs?
Can I fit Carat alloys to these studs or do I need longer ones?
I take it that all I need for the fronts are the correct tapered bolts.
I take it I don't need any spacers either.

Gonna put an order in with Mr Baxter for some shiney nuts 'n' bolts but, just not sure whether I need to order some new studs :?
Paul

1990 Autohomes Kamper 1.9DG......... (Diabolical miles per Gallon)
Top
g60steve
Trader
Posts: 1342
Joined: 11 Oct 2005, 08:30
80-90 Mem No: 0
Location: Barnsley...that's oop norf!

Post by g60steve »

Carat alloys fit to standard length studs.....just tapered seated nuts and bolts from Mr Baxter is all that's required.
Top
Locked

Return to “Wheels & Tyres”