havin trouble with eber.when taking out black box which i think is inverter noticed smaller of two leads on back is cut with two white wires sticking out.does any one know what these are for ?also there is a brown connector coming up beside silver box with a blue wire and brown wire.
should these wires be joined to the two white wires?
could this be why my eber aint working.[/img]
whats goin on here
Moderators: User administrators, Moderators
-
gally
- Registered user
- Posts: 43
- Joined: 07 Nov 2007, 12:36
- 80-90 Mem No: 4530
- Location: athlone. the middle .ireland member4530
whats goin on here
2.1 dj. auto hi top westfalia club joker
-
VWCamperfan
- Registered user
- Posts: 993
- Joined: 08 Jul 2007, 19:47
- 80-90 Mem No: 4000
- Location: Sheerness, Kent.
I think the two white wires should run to a resetable over-temperature switch at the end of the unit. If the two wires are joined this will simulate a 'reset' switch, which is the normal for running. If yours are apart or not connected then try joining them first and if this works try to get hold of a new switch. It should have a little red button on top of it which you can push to reset if an overheat condition occurs.
Mark.
I'm Not A Complete Idiot... Some Bits Are Missing!
1.6 Modified CT engine.
I'm Not A Complete Idiot... Some Bits Are Missing!
1.6 Modified CT engine.