i've got a dg 1,9 cc water cooled petrol engine#
g reg
1990
thinking about adjusting carb - am assuming - staring up at me is the idle speed screw - long - flat blade screwdriver adjustment - 900 rpm give or take 50 rpm says haynes - currently - just under 1100 -
my q is - where is the co2/emission screw? b good to know - if looking down on carb - with idle screw facing u? 2e3 caRB -
i thank yew in advance -
( has anyone done a map of an dg engine? like hip bone connected to.... water pump connected tp... b ruddy useful....)
adj screws 4 carb
Moderators: User administrators, Moderators
-
edoh
- Registered user
- Posts: 240
- Joined: 12 Aug 2007, 08:42
- 80-90 Mem No: 3974
- Location: epping essex
adj screws 4 carb
Owner of a red T25 fixed hi top campervan - colour - spikey red - petrol - water cooled - 1.9 dg engine rhd - 1990 g reg n still going strong!-
-
edoh
- Registered user
- Posts: 240
- Joined: 12 Aug 2007, 08:42
- 80-90 Mem No: 3974
- Location: epping essex
i got it!
2 inches below idle screw - in its own little housing cover - can see a place for a flat bladed screwdriver -
may need to get the alfords equipment to set up - measure - adjust -
2 inches below idle screw - in its own little housing cover - can see a place for a flat bladed screwdriver -
may need to get the alfords equipment to set up - measure - adjust -
Owner of a red T25 fixed hi top campervan - colour - spikey red - petrol - water cooled - 1.9 dg engine rhd - 1990 g reg n still going strong!-