sliding door grab handle measurements

Post by **lloyd** » 10 Sep 2007, 12:33

got the grab handle, but didn't have enough sense at VF to measure where it mounts on post

Could some kind sole give me the measurement from bottom of lower sliding door track to bottom of handle?

Thanks,

Lloyd

Post by **scoobydrew** » 10 Sep 2007, 13:42

llloyd,
Ours measures 29 1/4 inches to the very bottom of the handle with the raw plugs in.

Cheers
Andy

Post by **lloyd** » 10 Sep 2007, 14:49

Thanks Andy!

That's exactly what I needed to know. I could have guessed, but figured VW took a little time figuring out what was best placement.

Lloyd

Post by **Cruz** » 10 Sep 2007, 15:28

Sliding door grab handle? never heard of one of those. Were do they fit and what's the benefit?

Post by **T3teedub** » 10 Sep 2007, 17:48

This may be an extra handle fitted to the inner door ?? to help closing the door without slamming. I fitted one in both my Bays but not felt the need in the T3.

Post by **lloyd** » 10 Sep 2007, 17:58

handle on pillar between front door and sliding door.. To help gimps in and out

Post by **T3teedub** » 10 Sep 2007, 19:25

Ah, right.

Post by **shepster** » 11 Sep 2007, 08:10

T3teedub wrote:This may be an extra handle fitted to the inner door ?? to help closing the door without slamming. I fitted one in both my Bays but not felt the need in the T3.

Obviously not got an early slider then!

Post by **Cruz** » 11 Sep 2007, 08:28

Too right. My early slider wakes up the entire campsite and makes all the roosting crows fly away every time it's closed