brake light sticking on

Big lumps of metals and spanners.

Moderators: User administrators, Moderators

Locked
User avatar
squire
Registered user
Posts: 2403
Joined: 11 Dec 2006, 10:03
80-90 Mem No: 3192
Location: Manchester

brake light sticking on

Post by squire »

i had some help with this last week, apparently the people who have lent my van say the brake light does not go out, they took in to kwik fit last week and the mechanic informed them that the level is fine. The people borrowing it took this as a green light and have continued using it..

My problem is as the van is not in my possesion it is hard to estimate the problem, please advise what you think the problem may be and end my torture..?

Apparently the van is running fine
" living is easy with eyes closed "

Squire 3192

3rustateers
Registered user
Posts: 222
Joined: 28 Aug 2006, 21:07
80-90 Mem No: 3144

Post by 3rustateers »

? switch on handbrake lever ?
Member Number 3144

User avatar
squire
Registered user
Posts: 2403
Joined: 11 Dec 2006, 10:03
80-90 Mem No: 3192
Location: Manchester

Post by squire »

i didnt know there was a switch on the hand brake lever, do you mean the button at the end of the handbrake, if so then yes they have tried this
" living is easy with eyes closed "

Squire 3192

3rustateers
Registered user
Posts: 222
Joined: 28 Aug 2006, 21:07
80-90 Mem No: 3144

Post by 3rustateers »

I presume you mean the brake light on the dash?

If so, I was refering to the switch that is attached to the handbrake lever which can be found by lifting up the rubber gator. A single wire is connected by a spade connector. Check this connection/wire is ok. Can supply pics if that helps.
Member Number 3144

User avatar
squire
Registered user
Posts: 2403
Joined: 11 Dec 2006, 10:03
80-90 Mem No: 3192
Location: Manchester

Post by squire »

thanks mate, i will give this a whirl
" living is easy with eyes closed "

Squire 3192

User avatar
squire
Registered user
Posts: 2403
Joined: 11 Dec 2006, 10:03
80-90 Mem No: 3192
Location: Manchester

Post by squire »

tried all the above, the spade end that goes on a male to female was cleaned of gunk, unfortunatley the light stayed the only difference was that the light faded slightly when the handbrake was off.. :?:
Any takers.....
" living is easy with eyes closed "

Squire 3192

Locked