manifolds and linkage etc

Post by **jonnyshowbiz** » 17 Jul 2007, 11:31

Hi,

I have ordered my carbs, dells 40's

an need to get some manifolds linkage, air filters suggestions ??

Post by **west E** » 20 Jul 2007, 19:12

got mine from vw speedshop. Make sure you tell him it's for t25 and he will send you smaller air filters 1.5".

cheers

ian

Post by **west E** » 20 Jul 2007, 19:23

oops,
forgot to say if you ask him he will have the hole's put in the vaccuum bose's in each manifold and supply em for an extra twenty quidish, if you dont you'll have no brakes!!. Buy the dellorto superperformance tech book, and an anti pulse valve from www.dellorto.co.uk.

cheers

ian

Post by **jason k** » 21 Jul 2007, 07:34

agree!!!
but as a point of note, both myself and stretch dont run an anti pulse valve and have no side effects.
jim at stateside tuning sells the fannymoulds and linkages too

Post by **silverfoxfintry** » 21 Jul 2007, 20:55

I lined my hi-top with an voil/bubble-wrap/foil sandwich and then corded carpet.
It was stuck on with spray glue.
It made some diference to the heat.

Post by **jason k** » 22 Jul 2007, 10:55

silverfoxfintry wrote:I lined my hi-top with an voil/bubble-wrap/foil sandwich and then corded carpet.
It was stuck on with spray glue.
It made some diference to the heat.

erm .................
wrong thread i think chap!!!!!!

Club 80-90 Forums

manifolds and linkage etc

manifolds and linkage etc

Lining

Re: Lining