Oil drain plug for 1990 T25 1600 TD.

Post by **deke** » 01 Jul 2007, 13:39

Can anyone please help? The thread is stripped on my oil drain plug and I'm finding it impossible to locate a spare. Tried Main dealers, German Swedish, Volkspares ;no dice. The thread measures 16mm across and looks identical to the 12mm people keep presenting me with. The camper is in great nick, Geman and previously owned by a Doctor who seems to have kept it well serviced. For such a stupid thing it is now disabled and we go off on hols to France in 3 weeks or so we hope!! I have the old one to hand to compare. Thanks. Deke.

Post by **peasant** » 01 Jul 2007, 13:59

Take it to your nearest machine shop and get one made.

The drain hole on your sump was probably damaged at some stage and somebody drilled a bigger hole ...hence the non-standard plug.

Post by **ELVIS** » 01 Jul 2007, 17:54

main dealer - part number for M16 sump plug/bolt is 068103193A , u will be surprised at how cheap some of their stuff is!

Post by **ELVIS** » 01 Jul 2007, 17:59

going to fastener place tomoz morning - will try and pick up a M16 x 25 bolt for ya , will let ya know tomoz! (prob be alot cheaper than main stealer though) do you know if its got a differing to standard thread pitch ?

Post by **deke** » 01 Jul 2007, 21:58

thanks everyone. Actually they (main dealer) ordered part 068 103 193A for me but I went to get it ystrdy and it was a long bolt not at all like the other and with the wrong thread type The other plug they offered looked identical to mine but was 14mm (not 12mm as I said before). The thread on the 14mm and 16mm is the same. As far as the thread on the casing goes, I have reason to believe it to be OK as my mechanic fitted a plug from another car but it leaks because of the lack of a washer. My thoughts are 1) Maybe the other car bolt would work with a washer. I need to check whether it snugged down against the casing. 2) Maybe the 068 103 193A part is OK but they took delivery of the wrong one? It was like nothing I've ever seen and they wanted to charge over £8 for it!! 3) Respect for people who do major renovations. This must seem Mickey Mouse to them. 4) Thanks Elvis I assume it to be standard but beware of the 2 inch long one I mention above Mine measures 16mm across threads and 21mm from top of hexagon flat to bottom. Many thanks, Deke

Post by **ELVIS** » 01 Jul 2007, 22:20

according to vagcat the thread pitch of M14 is 1.5mm , so standard (fine)thread. will see if i can pick up a M16 x 20 then . will let ya know tomoz.

Post by **Hacksawbob** » 01 Jul 2007, 22:32

you can pick up washers from Halfords, I use a ford one one mine

Post by **ELVIS** » 02 Jul 2007, 17:20

got ya a bolt , right thread pitch but a bit long - 40mm - not gonna foul anything so no probs with length. halfrauds had limited stock of washers - ours is a***- but got a handful. PM me your addy and will post tomoz cheers elvis

Club 80-90 Forums

Oil drain plug for 1990 T25 1600 TD.

Oil drain plug for 1990 T25 1600 TD.

OIL drain plug for 1990 T25 1600 TD.