I have an injection engine with a DH engine code, i was lead to belive when i bought the engine that it was a 2.1 DJ but i now think its a 1.9 injection??? can anyone confirm this is the case?
I want to replace the water pump as i am having some circulation issues, does anybody have any idea what would be the most suitable pump to purchase from JK's???
is there anything i need to be aware/careful of when replacing a water pump?
Cheers in advance
Devs
Water Pump
Moderators: User administrators, Moderators
-
kyleewyleecoyote
- Registered user
- Posts: 73
- Joined: 06 May 2006, 07:17
- 80-90 Mem No: 3157
- Location: Canterbury
I doubt there's much difference between the petrol engine pumps, but I'm sure somebody will confirm or correct this. If you've got a DH, one for the DH.
Make sure all surfaces are free of dirt, grease and old sealant before re-fit; that O rings are in good nick (if not supplied). I use a grey oil, water resistant gasket/pipe sealant from Toyota.
Be sure to use the correct torque settings (I had a bit of dyslexia and snapped a stud). Refer to Haynes manual.
Enjoy!
Make sure all surfaces are free of dirt, grease and old sealant before re-fit; that O rings are in good nick (if not supplied). I use a grey oil, water resistant gasket/pipe sealant from Toyota.
Be sure to use the correct torque settings (I had a bit of dyslexia and snapped a stud). Refer to Haynes manual.
Enjoy!
It's unlucky to be superstitious....
Member
Member