Rear hand brake cable

Big lumps of metals and spanners.

Moderators: User administrators, Moderators

Locked
Cruz
Registered user
Posts: 3919
Joined: 12 Oct 2005, 10:40
80-90 Mem No: 2092

Rear hand brake cable

Post by Cruz »

Does anyone know where I can get the securing grommet that holds the rear hand brake cables to the underbody support? Or does it come already attatched on a new cable? (JK images suggest not)

The pictures below show that the left cable is a snug fit with the correct grommet but the right hand is missing this piece and a past owner has bodge some kind of bush onto the cable.

This is preventing my left hand cable from working properly and giving me a crap handbrake no matter how much it's tightened.



[img:400:415]http://uk.geocities.com/georgina_shaun@ ... cable1.jpg[/img]
[img:400:352]http://uk.geocities.com/georgina_shaun@ ... cable2.jpg[/img]
LEFT CABLE

[img:400:394]http://uk.geocities.com/georgina_shaun@ ... cable1.jpg[/img] [img:400:394]http://uk.geocities.com/georgina_shaun@ ... cable2.jpg[/img]
RIGHT CABLE

clartsonly
Registered user
Posts: 27
Joined: 22 Feb 2007, 11:15
80-90 Mem No: 0
Location: bedfordshire

Post by clartsonly »

are you sure it is not pulling properly, my handbrake doesn't work very well either on any kind of slope. I was told to tighten it up on the shoes.
Dylan = C Reg 1986 T25 1900 Water Cooled..

User avatar
Rozzo
Registered user
Posts: 3028
Joined: 20 Jan 2007, 20:43
80-90 Mem No: 3339
Location: doncaster

Post by Rozzo »

what are you "tightening"?
to get the handbrake to work correctly you adjust the brakes at the wheel not the handbrake cable? adjusting the cable just sets the height at which the lever in the cab locks the brakes on once they are correctly adjusted at the wheel.
trying to adjust the handbrake with the cable just pulls one end of each shoe in badly adjusted brakes against the drum and is fruitless.
LT owner and positively rattling around with the new found space
member 3339

Cruz
Registered user
Posts: 3919
Joined: 12 Oct 2005, 10:40
80-90 Mem No: 2092

Post by Cruz »

Forget the tightening remark the cable is taught and the shoes adjusted by Simon baxter to the best he could get. Even he thought the missing grommet *could* be the problem as without it the cable seems to kink to me.

I'm just after finding out if the missing grommet can be purchased or if it's on a new cable.

User avatar
Rozzo
Registered user
Posts: 3028
Joined: 20 Jan 2007, 20:43
80-90 Mem No: 3339
Location: doncaster

Post by Rozzo »

horace83 wrote:Forget the tightening remark the cable is taught and the shoes adjusted by Simon baxter to the best he could get. Even he thought the missing grommet *could* be the problem as without it the cable seems to kink to me.

I'm just after finding out if the missing grommet can be purchased or if it's on a new cable.
say no more :lol: the brakes will be adjusted properly fer sure :wink:
sorry to have ranted about adjusting the cable but it's suprising how many folk think you adjust the handbrake by tightening the cable :rofl
can't help with the grommet info but every cable i have bought for any other vehicle has come with everything.
LT owner and positively rattling around with the new found space
member 3339

Locked