ive now fittted twin 36mm drla's (from an alfa romao) their mounted though they sit to high for the engine cover, do i need some slimmer airfilters? and ive no idea what to do with the vacum tubes??
if anyone can help that would be great.
cheers
Tom
dellorto instalation
Moderators: User administrators, Moderators
-
jason k
- Registered user
- Posts: 938
- Joined: 13 Nov 2005, 09:35
- 80-90 Mem No: 1959
- Location: aberdare south wales
my drlas sit well under the lid (by about inch and a half or so) what inlets do you have?
as for the vacc tubes you need to tap a boss into each inlet for the servo to function.
if you are talking about the vacc pipes from the dizzy. discard the retard one and connecet the advance to the lh carb (as you look at the engine)
as for the vacc tubes you need to tap a boss into each inlet for the servo to function.
if you are talking about the vacc pipes from the dizzy. discard the retard one and connecet the advance to the lh carb (as you look at the engine)
-
jason k
- Registered user
- Posts: 938
- Joined: 13 Nov 2005, 09:35
- 80-90 Mem No: 1959
- Location: aberdare south wales
i had all my parts from www.raceshack.co.uk
give them a bell if you need any advice or getting the bus jetted and dynod. these lads have done a few!!
give them a bell if you need any advice or getting the bus jetted and dynod. these lads have done a few!!
-
west E
- Registered user
- Posts: 4
- Joined: 13 Jun 2006, 20:41
- 80-90 Mem No: 2370
- Location: leyland, lancashire
Got my stuff from vw speedshop. They supplied me with smaller air filters about 1.5" i think. They only just fit though! I had to remove the bar which goes accross the middle of the engine lid as this was catching the linkage bar.
Have you put in the vaccuum take off's in? I also got a anti pulse valve which is recommended if have a stock distributor, you can get this from eurocarb, they also do a tuning manual which i found really helpfull, also got tons of advice from jason k, cheers mate, there sounding good!
if you need any more advice pm me.
cheers
ian
Have you put in the vaccuum take off's in? I also got a anti pulse valve which is recommended if have a stock distributor, you can get this from eurocarb, they also do a tuning manual which i found really helpfull, also got tons of advice from jason k, cheers mate, there sounding good!
if you need any more advice pm me.
cheers
ian
if you can't fix it have a drink.
