connecting speakers up

Post by **donkey** » 27 Apr 2007, 06:37

Hi,
Can anyone tell me how you feed speaker cable from under the dash through into the door.
I can not see a hole where it feeds through so it has got me stumped!!
Any suggestions?????????
Thanks Steve...

Post by **andygti39** » 27 Apr 2007, 10:26

the proper way would be to drill a hole in the door and shell then insert a rubber grommet in the holes then thread the wires through.
but getting a drill in is a problem without removing the door

in gonna be putting speakers in my doors this weekend so i'll way it up then and let you know

owlets · Post by **owlets** » 28 Apr 2007, 13:46

Where did you end up putting the wires? I've just fitted the speakers to my door cards, but not sure where to put the wires either.

Post by **hembo666** » 28 Apr 2007, 13:54

whoever fitted mine just ran the in under the bottom corner of the door card

owlets · Post by **owlets** » 28 Apr 2007, 14:22

hembo666 wrote:whoever fitted mine just ran the in under the bottom corner of the door card

ANd then under the carpet?

Post by **hembo666** » 28 Apr 2007, 15:15

yep, out the cornor of the door card, under the carpet and up into the dash. looks crap and i have to keep threading the access back in every so often but it works.

The way Mocki suggested would be the way to do the job properly, thats how its done in all cars with door speakers

owlets · Post by **owlets** » 28 Apr 2007, 16:53

what way did mocki suggest?

Post by **Bowton Lad** » 29 Apr 2007, 23:29

andygti39 wrote:the proper way would be to drill a hole in the door and shell then insert a rubber grommet in the holes then thread the wires through.
but getting a drill in is a problem without removing the door

Flexible drive thingy for your electric drill.

Post by **donkey** » 30 Apr 2007, 06:40

I have sorted the problem. I have took some pictures and will post them later.