Looking to get a hydraulic press for the garage. I initially want it for wheel bearings but would like it to be capable of other jobs like bushings etc.
Can I get away with a 10 tonne hydraulic press? Once you go above 10 tonne they seem to all get significantly more expensive.
Cheers,
Scott
Is 10 tonne enough?
Moderators: User administrators, Moderators
-
scotttie
- Registered user
- Posts: 131
- Joined: 11 May 2011, 09:56
- 80-90 Mem No: 16828
- Location: East Sussex
Is 10 tonne enough?
______________________________________________________________________
2.1DJ Syncro Reimo hightop
2.1DJ Syncro Reimo hightop
-
davidoft1
- Trader
- Posts: 2931
- Joined: 27 May 2009, 18:56
- 80-90 Mem No: 16628
- Location: hayling island
Re: Is 10 tonne enough?
10 is ok for most things but usually operating close to max regularly , 20 is better