Coolant pipes for 1983 petrol

Big lumps of metals and spanners. Including servicing and fluids.

Moderators: User administrators, Moderators

Post Reply
User avatar
Fun.
Registered user
Posts: 162
Joined: 17 Jul 2018, 12:04
80-90 Mem No: 16678
Location: Fife, Scotland

Coolant pipes for 1983 petrol

Post by Fun. »

Hi All

Can anyone make a recommendation for a coolant pipe kit for a 1983 petrol?

Cheers

Fun.
_
Water Cooled 1983 Petrol T25
She's had 21 previous owners, I'm no. 22
She's now named Daisy

User avatar
jrt
Registered user
Posts: 3460
Joined: 01 Oct 2011, 15:53
80-90 Mem No: 10288
Location: East Cheshire

Re: Coolant pipes for 1983 petrol

Post by jrt »

Engine bay or front to rear metal?
I bought my front to rear from Just Kampers.
Brickwerks/ JK and Heritage do a bundle kit of the (rubber)engine bay one’s.
David.
the future is unwritten

User avatar
Fun.
Registered user
Posts: 162
Joined: 17 Jul 2018, 12:04
80-90 Mem No: 16678
Location: Fife, Scotland

Re: Coolant pipes for 1983 petrol

Post by Fun. »

I was looking to replace all, my local garage has recommended I do so as the metal pipe are corroded and the remaining ones aren't much better.
_
Water Cooled 1983 Petrol T25
She's had 21 previous owners, I'm no. 22
She's now named Daisy

shepster
Registered user
Posts: 1734
Joined: 12 Oct 2005, 11:14
80-90 Mem No: 1342
Location: Wolverhampton.

Re: Coolant pipes for 1983 petrol

Post by shepster »

Fun. wrote: 03 Mar 2023, 08:50 I was looking to replace all, my local garage has recommended I do so as the metal pipe are corroded and the remaining ones aren't much better.

Best dig deep then, Brickwerks as already suggested.

They do standard rubber as well as silicon versions of some so the choice is yours, the early systems have 4 big fat ones going around the engine bay with a connector/bleed valve thing joining them so replace that as well if you can.
2.1 DJ running on carb and LPG.

Latenights
Registered user
Posts: 15
Joined: 29 Oct 2019, 13:14
80-90 Mem No: 17056
Location: Merthyr Tydfil, South Wales, UK

Re: Coolant pipes for 1983 petrol

Post by Latenights »

shepster wrote: 03 Mar 2023, 09:05
Fun. wrote: 03 Mar 2023, 08:50 I was looking to replace all, my local garage has recommended I do so as the metal pipe are corroded and the remaining ones aren't much better.

Best dig deep then, Brickwerks as already suggested.

They do standard rubber as well as silicon versions of some so the choice is yours, the early systems have 4 big fat ones going around the engine bay with a connector/bleed valve thing joining them so replace that as well if you can.
I'm in the process of doing the same, only swapping mine from an early setup to a late setup.

This site has a schematic that shows almost all of the rubber hoses you'll need:

https://www.coolairvw.co.uk/category/shop-by-vehicle/type-25/type-25-engine/type-25-waterboxer-cooling-system/type-25-water-hoses-pipes/

You can use the left and right arrows either side of the schematic to scroll through the various engines and years.

Hover over the little bus icon next to a pipe and it will bring up a pop up window with the OEM part number and a description of the hose (or the size of the hose clip.) If you look at the actual listed products it also has the metal pipes and their OEM numbers, but you'll have to find these one by one for your specific engine. I've found that they are cheaper than a lot of others for the hoses too.

Google the OEM part number and you might find even cheaper than the VW or T25 specialists. For example, I found that www.123spareparts.co.uk has consistently lower prices for the hoses than many other sites, though I can't comment as to quality and I'm not sure how much postage is.

Hope this helps!
1985 T25 1.9 DF WBX with LPG kit

Post Reply