Hi all. My 84 dg is leaking oil from base of breather tower. Should there be a gasket on there? Or does it have an o ring? Can’t make out if it does have an o ring and whether it’s gone hard
Any help much appreciated!
Thanks
Oil breather leak
Moderators: User administrators, Moderators
-
DoubleOSeven
- Registered user
- Posts: 2500
- Joined: 25 Jul 2014, 21:10
- 80-90 Mem No: 14520
- Location: Reading, England
- Contact:
Oil breather leak
Yeah should have an O-ring N90106101 and there should be 2 washers on each stud, flat & spring, but don’t over tighten the nut, it only needs 8Nm torque.
Last edited by DoubleOSeven on 24 Apr 2022, 07:55, edited 2 times in total.
2005 Porsche 911 3.6 Manual
2012 Volkswagen Polo 1.4 Automatic
2012 Volkswagen Polo 1.4 Automatic
-
ZsZ
- Registered user
- Posts: 1543
- Joined: 12 Feb 2009, 16:28
- 80-90 Mem No: 14899
- Location: Budapest, Hungary
- Contact:
Re: Oil breather leak
It should have an O-ring:
Partnr is N90106101
Victor Reinz equivalent partnr: 40-76151-00
63x4mm
E D I T: I was slow...
Partnr is N90106101
Victor Reinz equivalent partnr: 40-76151-00
63x4mm
E D I T: I was slow...
Last edited by ZsZ on 24 Apr 2022, 14:30, edited 1 time in total.
Zoltan
1986 Multivan ex-Caravelle. Van since 2006, running mTDi 1Z since 2008 with Fiat Croma 1.9 TDid pump 2008-2019, custom pump since 2019
5spd custom box 4.57 diff + 0.74 5th
1986 Multivan ex-Caravelle. Van since 2006, running mTDi 1Z since 2008 with Fiat Croma 1.9 TDid pump 2008-2019, custom pump since 2019
5spd custom box 4.57 diff + 0.74 5th
