Were can I get rubber seal for my high top?
Moderators: User administrators, Moderators
-
taragodfrey72
- Registered user
- Posts: 1
- Joined: 20 Sep 2020, 09:08
- 80-90 Mem No: 0
Re: Were can I get rubber seal for my high top?
MaxStu
1987 2.1 Automatic Carb/LPG Autosleeper.
"Blissfully happy in your presence".
1987 2.1 Automatic Carb/LPG Autosleeper.
"Blissfully happy in your presence".
-
300CE
- Registered user
- Posts: 2578
- Joined: 16 Aug 2012, 13:05
- 80-90 Mem No: 12017
- Location: Sidcup, Kent
Re: Were can I get rubber seal for my high top?
+1 for seals direct - not the cheapest but the quality is superb. If you're unsure on what to get, take a picture and they'll advise on what's required.
'86 DG, Weber Carb
-
kentishvanman
- Registered user
- Posts: 652
- Joined: 27 May 2007, 20:48
- 80-90 Mem No: 875
- Location: Weald, Kent
Re: Were can I get rubber seal for my high top?
Assuming you mean the rubber u- shaped seal between the high top and the 'tin top I got rid of mine way back. There were rivets to hold the high top on to the tin top but these were just rust spots/holes and muck used to collect behind the rubber.
Removed trim & muck, treated rust, squirted rust inhibitor into holes and filled with Isopon. Squeezed Sika adhesive/filler into joint/space between high top and roof. Front and rear treated the same. Been like this for 10+ years.
Removed trim & muck, treated rust, squirted rust inhibitor into holes and filled with Isopon. Squeezed Sika adhesive/filler into joint/space between high top and roof. Front and rear treated the same. Been like this for 10+ years.
1987/8 Autosleeper, 1.9dg (Automatic) hightop. Petrol/ LPG