Clutch slave

[dumbo]

Hi all how to bleed a clutch slave just want to make sure thanks

[Mocki]

I usually make sure the res is topped up to just above the max line, undo the bleed nipple on the slave andleave it about a hour , go have a cup of coffee and a slice of toast , come back , with a operative , do the nipple up , check fluid level is up to max , get operative to press pedal down two or three times , then hold at the bottom at the third time , whilst you undo the nipple Extracting fluid , do it up tell the operative to let foot up and it’ll be done , if not repeat the bit after toast !
Gravity does most of the job .

[dumbo]

Thanks Steve