hub caps

Post by **sendiw** » 20 Feb 2007, 21:58

hello all
I bought some nice shiny hub caps at Dubroast. When I tried to fit them I found that the nsf one wont go on because the end of the speedo cable is in the way at the centre of the hub cap. Any ideas

how to get round this please.
Richie

Post by **Fritz** » 20 Feb 2007, 22:46

Richie, If your grider is still operational ,I'd be simply skimming the prowd bit off the end of the cable,,,,,,,OR even placing a socket (8mm) over the bit sticking out of the grease cap and giving it a whack with an FBH.

Regards

Fritz,,,,,,,

Post by **sendiw** » 20 Feb 2007, 23:10

Thanks Fritz I will give that a go. The FBH seems to be a very common solution with our vans
Cheers

Post by **Fritz** » 20 Feb 2007, 23:39

Everyone should carry an FBH to be on the safe side, it has a multitude of uses,,,,,

Regards,

Fritz,,,,,,

Post by **kevtherev** » 21 Feb 2007, 16:24

We call it a Gornal screwdriver in these parts

Club 80-90 Forums

hub caps

hub caps

Shiney Bitz,,,,