Starter motor gasket

[Izzi]

Hi all.........I'm replacing the starter motor on my t25. I've been told that it is not necessary to fit a gasket. Can anyone enlighten me please? Thanks.

[Smcknighty]

There isn't a gasket


Sent from my iPhone using Tapatalk

[Smiffo]

Mine doesn't have a gasket.
Actually, if I think about it, the starter motor needs to be earthed through the engine, so a gasket would insulate it and the van wouldn't start.

[T3luestar]

Don't forget to fit a new bush while your at it.
https://www.brickwerks.co.uk/bush-t3-st ... l?___SID=U" onclick="window.open(this.href);return false;

[Izzi]

Don't forget to fit a new bush while your at it.
https://www.brickwerks.co.uk/bush-t3-st ... l?___SID=U" onclick="window.open(this.href);return false;

Thanks all for your replies. What's the best way to get the bush out and refit the new one?

[Smiffo]

Don't forget to fit a new bush while your at it.
https://www.brickwerks.co.uk/bush-t3-st ... l?___SID=U" onclick="window.open(this.href);return false;

Thanks all for your replies. What's the best way to get the bush out and refit the new one?

An M12 tap. make sure it tapers down a bit on the end, or it won't bite. It's fiddly, so be prepared to get frustrated..!!
Failing that, you can leave it in and get a starter motor that doesn't need a bush, but they are the `high torque` variety and are a bit more expensive.

[Izzi]

Thanks guys for that help. Appreciate it!

[T3luestar]

A bit more info on the bush removal here.... https://club8090.co.uk/wiki/Pe ... sh_removal" onclick="window.open(this.href);return false;

[IndigoSteve]

The 12mm tap works brilliantly in getting the bush out


Sent from my iPad using Tapatalk