Whistle stops..how?

[max and caddy]

What are they attached with as standard? I assume screws as getting a riveter in is not easy...but the holes in the pillar are bigger that the holes in the metal strips....so I assume the screw does actually go from the door side?

[silverbullet]

Plastic barbed fittings iirc

[lloydy]

held in by small screws/hex head bolts. can take a couple pics of my fixings in the morning if you like?

[what2do]

held in by small screws/hex head bolts. can take a couple pics of my fixings in the morning if you like?

Please do as these are 'on the list'.

[silverbullet]

Not what I remember from the 1990 twin slider I sold, but could be wrong.

[lloydy]

mine and a van i removed a set from had small bolts

[Plasticman]

of the 4 fixings, obviously you need the door off, the top and bottom i find easiest access is to tape an 8mm socket filled with blu-tack and poke this through to hinge fixing hole. on the middle two they are slightly offset so access to the side of the hinge mount strip , that said most ive done have been secured with pozi screws
mm

[max and caddy]

So by bolts you mean self tappers? I think I know what ian is referring to but not those..these need a proper metal fastener...maybe I will check ETKA..

[Plasticman]

I go take picky of one now for you

[Plasticman]

new i had a pair someplace , they are handed ,this is an O/S

..

..

yes self taps but sometimes seen them with hex head (8mm) more usually pozi,i can do a BOGOF
mm

[Plasticman]

oh and i have the A post corner body cut it came from if you really want a picky of that as well
mm

[ELVIS]

N 0138845 they are a hex head self tapper Alex

[max and caddy]

That's saved me a look..thanks..