Multivan Seat Fixings
Moderators: User administrators, Moderators
-
Oilline
- Registered user
- Posts: 278
- Joined: 16 Jun 2011, 09:51
- 80-90 Mem No: 9818
- Location: Lothersdale
Multivan Seat Fixings
Does anybody know what the dog bone shaped things are used for on Multivan rear seat. Also are the other fixings required or can the seat just be bolted straight in?
1986 Syncro EJ251, 2007 T5 4-Motion, Active Snowtrac, Golf Mk2 Syncro
-
T3luestar
- Registered user
- Posts: 661
- Joined: 07 May 2012, 10:31
- 80-90 Mem No: 13845
- Location: Widnes
Re: Multivan Seat Fixings
The rubber dog bone shape things, are covers for the latches that the seat back clips into(the small white pins) when the bed is flat. Just so you don't hurt yourself on them whilst your a kip.
-
silverbullet
- Trader
- Posts: 17231
- Joined: 08 Jun 2009, 09:51
- 80-90 Mem No: 6908
- Location: Surrey Syncronaut #156
- Contact:
Re: Multivan Seat Fixings
The square box standoffs go behind the multivan plastic side panels, the R&R hinges then bolt to them.
In brief, you need the lot.
The multivan bench/bed is about 50mm narrower than the caravelle one, which is narrower again compared to the fixed bench.
In brief, you need the lot.
The multivan bench/bed is about 50mm narrower than the caravelle one, which is narrower again compared to the fixed bench.
1985 Oettinger 3.2 Caravelle RHD syncro twin slider. SA Microbus bumpers, duplex winch system, ARC 7X15 period alloys