heater control

Post by **kevtherev** » 24 Dec 2006, 10:04

Well it appears that my flap control cable has detached itself from the lower vent, not at the controler.

How is it accessed?

Post by **T'Onion** » 24 Dec 2006, 11:07

Kev
Carefully pull all the controls off ( the sliding ones) and the fan knob , then very carfully prise off the black cover ,its held on with two press in lugs , then theres a large cross headed screw holding the control unit on and that is it

have fun

Post by **kevtherev** » 24 Dec 2006, 18:56

ta muchly Mark.
when I'm sober in about three days we'll have a go

Post by **Ivorblueun** » 24 Dec 2006, 23:37

Hi Kev if you are referring to the foot well heater flap, that connects to the flap box on the right hand side and can be accessed by removing the dash pod

Post by **kevtherev** » 24 Dec 2006, 23:54

I was and thanks