Hi all,
Looking to buy some 1980's Classic Rial Mesh alloys for my van. They 15 inch diameter, 7J wide, Offset is 35. Centre bore 66.6mm. Will they fit okay?
Any help/comments please would be great, thanks lots
Need a bit of conformation please :)
Moderators: User administrators, Moderators
-
BudPreston
- Registered user
- Posts: 14
- Joined: 21 Jul 2015, 12:16
- 80-90 Mem No: 10799
- Location: Romney Marsh Kent
-
silverbullet
- Trader
- Posts: 17231
- Joined: 08 Jun 2009, 09:51
- 80-90 Mem No: 6908
- Location: Surrey Syncronaut #156
- Contact:
Re: Need a bit of conformation please :)
Might need a 5mm spacer to avoid the rim catching the top wishbone.
So you may then need slightly longer studs to keep it all safe.
Hard to say with 15" rims, it all gets a bit close.
So you may then need slightly longer studs to keep it all safe.
Hard to say with 15" rims, it all gets a bit close.
1985 Oettinger 3.2 Caravelle RHD syncro twin slider. SA Microbus bumpers, duplex winch system, ARC 7X15 period alloys
-
BudPreston
- Registered user
- Posts: 14
- Joined: 21 Jul 2015, 12:16
- 80-90 Mem No: 10799
- Location: Romney Marsh Kent
Re: Need a bit of conformation please :)
Okay cool, really appreciate the advise. Thanks lots mate. Will let you know if I get them fitted okay!
Grasshoppers JFC Av it!