t25 accelerator getting jammed on full revs
Moderators: User administrators, Moderators
-
- Registered user
- Posts: 6
- Joined: 10 Jun 2015, 08:18
- 80-90 Mem No: 0
t25 accelerator getting jammed on full revs
hi am new here so please bare with me. I know nothing about my camper van but guess I am about to learn. The accelerator got jammed on full revs as I was driving along yesterday. Its happened a couple of times before when starting and I have gone into the engine and unjammed it but now I am loath to drive it as it scared the life out of me yesterday. Any idea how to stop this from happening. Also she does not like to start, when you turn the key it sounds very pathetic and sad and then after three or four trys she will put in the effort and get going. She does this every time so its not cold etc she could have a two hour run, pull in for petrol and do it.
Any help much appreciated by this daft girl who has only just discovered when the dipstick is.
Tina
Any help much appreciated by this daft girl who has only just discovered when the dipstick is.
Tina
-
- Registered user
- Posts: 37
- Joined: 19 Jun 2008, 04:44
- 80-90 Mem No: 5528
- Location: Eldoret, Great Eastern Rift, Kenya (or thereabouts)
Re: t25 accelerator getting jammed on full revs
Hi Tina:
Just try squirting some WD40 on every thing connected with the throttle, from the front to the back. It'll mean getting under the van as well, to look for the place where the cable ends at the front. If you just follow the cable you will find it. No guarantees but its amazing what a bit of oil can do. Enjoy!
Dubwana
Just try squirting some WD40 on every thing connected with the throttle, from the front to the back. It'll mean getting under the van as well, to look for the place where the cable ends at the front. If you just follow the cable you will find it. No guarantees but its amazing what a bit of oil can do. Enjoy!
Dubwana
5528 1.6D '81
Dubwana: A Swahili monster...to push start
Bwana: A Swahili gentleman...when it works
Dubwana: A Swahili monster...to push start
Bwana: A Swahili gentleman...when it works
- itchyfeet
- Registered user
- Posts: 12425
- Joined: 23 Jul 2007, 17:24
- 80-90 Mem No: 12733
- Location: South Hampshire
Re: t25 accelerator getting jammed on full revs
Two seperate issues, stick the slow starting on another post and concentrate on the accelerator.
as suggested wd40 first to see if it's just sticking, when not running press the throttle repeatedly and see if you can replicate the fault.When doing this you will squirt excess fuel into the engine so leave it a day to dry out before trying to start.
Wd40 is not oil, so ideally wait a day for it to evaporate then add some spray oil back on.
it could however be a frayed cable somewhere, only a new one would fix that.
as suggested wd40 first to see if it's just sticking, when not running press the throttle repeatedly and see if you can replicate the fault.When doing this you will squirt excess fuel into the engine so leave it a day to dry out before trying to start.
Wd40 is not oil, so ideally wait a day for it to evaporate then add some spray oil back on.
it could however be a frayed cable somewhere, only a new one would fix that.
1988 DG WBX LPG Tin Top
itchylinks
itchylinks
Re: t25 accelerator getting jammed on full revs
Is it an auto?
2.1 LPG/Petrol Auto Caravelle
"The difference between genius and stupidity is that genius has its limits"
"The difference between genius and stupidity is that genius has its limits"
-
- Registered user
- Posts: 6
- Joined: 10 Jun 2015, 08:18
- 80-90 Mem No: 0
Re: t25 accelerator getting jammed on full revs
thanks everyone, its not an auto no. I will try the wd40, we have done this with the thingy in the engine and it still sticks. Will stick it in the shop next week and get the cable changed I think.
- kevtherev
- Registered user
- Posts: 18832
- Joined: 23 Oct 2005, 20:13
- 80-90 Mem No: 2264
- Location: Country estate Wolverhampton Actually
Re: t25 accelerator getting jammed on full revs
Cable change is was even for a novice...save yourself some moneyangelabbie wrote:thanks everyone, its not an auto no. I will try the wd40, we have done this with the thingy in the engine and it still sticks. Will stick it in the shop next week and get the cable changed I think.
AGG 2.0L 8V. (Golf GTi MkIII)
-
- Registered user
- Posts: 37
- Joined: 19 Jun 2008, 04:44
- 80-90 Mem No: 5528
- Location: Eldoret, Great Eastern Rift, Kenya (or thereabouts)
Re: t25 accelerator getting jammed on full revs
I agree totally, and to add, it might not be the cable.
If the WD-40 doesn't work, pull the sections apart one by one. I don't know what engine you have but think it as three sections: up to the beginning of the cable, the cable, from the end of the cable. If you can identify which section the problem is its cheaper to fix.
If the WD-40 doesn't work, pull the sections apart one by one. I don't know what engine you have but think it as three sections: up to the beginning of the cable, the cable, from the end of the cable. If you can identify which section the problem is its cheaper to fix.
5528 1.6D '81
Dubwana: A Swahili monster...to push start
Bwana: A Swahili gentleman...when it works
Dubwana: A Swahili monster...to push start
Bwana: A Swahili gentleman...when it works
- Fudgy666
- Registered user
- Posts: 295
- Joined: 28 Jan 2014, 14:29
- 80-90 Mem No: 13188
- Location: Split between South London & Herts
Re: t25 accelerator getting jammed on full revs
Do you know what engine & carberettor set up you have ?
If you are running a twin carb set-up you might find that the accelerator cable is attached to a bar/tube that bridges between the two carbs.

There is a return spring on the other side of that bar that connects to the bodywork at the rear of the engine bay.
Check to see if the spring is there, and not deformed & over stretched. If it's seen better days, time to invest in a new one. Super easy & cheap to change
If you are running a twin carb set-up you might find that the accelerator cable is attached to a bar/tube that bridges between the two carbs.

There is a return spring on the other side of that bar that connects to the bodywork at the rear of the engine bay.
Check to see if the spring is there, and not deformed & over stretched. If it's seen better days, time to invest in a new one. Super easy & cheap to change

1982 T25 2.0L Aircooled(CU) with Twin Solex's No idea what version/type of camper conversion
- Fudgy666
- Registered user
- Posts: 295
- Joined: 28 Jan 2014, 14:29
- 80-90 Mem No: 13188
- Location: Split between South London & Herts
Re: t25 accelerator getting jammed on full revs
itchyfeet wrote:Two seperate issues, stick the slow starting on another post.
Just in case you haven't, here's a few ideas to get you started (Excuse the pun !):
Make sure the battery is charged and is in good condition.
Check any/all earth links are rust free & clean and make good contact with the body (Especially the one mounted on the gearbox link.)
There is a copper bush that lives in the bellhousing that often gets missed when starter motors are replaced. Cheap, but fiddly to replace.
There is an earth strap between the starter & the starter solenoid. Check for rust/dirt etc.
Check the starter isn't reaching the end of it's days. Leave this until you have eliminated the other factors as it's the most expensive to fix/replace.
Most have been covered in seperate posts on the forum, just do a search.

1982 T25 2.0L Aircooled(CU) with Twin Solex's No idea what version/type of camper conversion