Autosleeper swivel base

[scottbott]

I have the original Autosleeper swivel seat base on the passenger seat and was wondering whether to remove it and just slide the seat off the runners and turn it around and refit it,the swivel base is bolted in and the runners are bolted onto it,is it ok to just bolt the original runners back as they were originally fitted as I do not want to weld them back in place.

[dbz864]

Why do you want to remove the swivel base, then go to all the trouble of removing seat then refitting it everytime you want to swivel round?

[scottbott]

it rattles a bit when driving and does my head in,there is a bit of movement in it as well as the seat back moving a little bit as well

[Jeff J]

it rattles a bit when driving and does my head in,there is a bit of movement in it as well as the seat back moving a little bit as well

Get yourself a wife or girlfriend, it only happens when the seats empty.

[a1winchester]

it rattles a bit when driving and does my head in,there is a bit of movement in it as well as the seat back moving a little bit as well

Get yourself a wife or girlfriend, it only happens when the seats empty.

[scottbott]

going to Ilfracombe next week will see if the wife makes it quiet when she sits on it if not will have to turn up Planet Rock on the radio