Rust converter

[Dazco]

Like many T 25 owners I have a few patches of seam rash that will need dealing with later this spring. I know the only sure way to stop it is to cut out and replace.
I've used vactan and while the results have been good I was wondering if anyone has used any other product with good results.
Thanks

[chriscburgess]

I've been looking at this as well.

I've heard Dinitrol is pretty good but wondered if anyone on here has any experiences of it?

[ajsimmo]

Fertan is excellent, I prefer it to Vactan. It leaves no waxy residue, can paint straight over it once dry, and it works a treat.

[Ant-t]

I've used krust quite a bit on mine, it works ok and provides a good surface for painting onto

[restoman]

Wurth do a good one

[boatbuilder]

Phosphoric acid - I use the 40% stuff but you can get higher concentrations which would probably work quicker. It turns the rusty bits black and etches bare metal leaving a good surface for painting.
You have to wash it off with water before you paint, but I usually dry it with a heat gun really quickly afterwards so it doesn't flash rust.
Then epoxy primer over it.