Does anyone sell an aaz jx conversion hybrid flywheel ready to bolt on 228mm clutch fitment and what clutch fits
Maybe needed in the future for a planned aaz conversion but then again reading others is it really worth it for so little power gains over a jx
aaz hybrid flywheel
Moderators: User administrators, Moderators
-
t25driver
- Registered user
- Posts: 30
- Joined: 19 Jun 2011, 09:45
- 80-90 Mem No: 9846
- Location: ayrshire
aaz hybrid flywheel
Last edited by t25driver on 06 Jun 2014, 07:06, edited 1 time in total.
-
lloydy
- Registered user
- Posts: 8015
- Joined: 24 Nov 2009, 17:54
- 80-90 Mem No: 5262
- Location: cheam surrey
Re: aaz hybrid flywheel
you just use the jx flywheel and clutch, nice and easy.
Time is a drug. Too much of it kills you
-
lloydy
- Registered user
- Posts: 8015
- Joined: 24 Nov 2009, 17:54
- 80-90 Mem No: 5262
- Location: cheam surrey
Re: aaz hybrid flywheel
Must be something up, as everyone I know used the jx set up (inc me) with no issue whatsoever.
Time is a drug. Too much of it kills you
Re: aaz hybrid flywheel
Nothing wrong with jx flywheel and clutch on aaz. I agree Loydy.
-
bobby-gg
- Registered user
- Posts: 155
- Joined: 22 Oct 2012, 10:43
- 80-90 Mem No: 11794
- Location: Northumberland
Re: aaz hybrid flywheel
On my 1Z conversion I used the flywheel that came with it becasuse I had a Brickwerks starter adapter to use, I used the matching Tdi pressure plate, and a 2.1dj 228mm clutch plate to match the input shaft splines
You don't need to use the Tdi starter, you can file down the nose housing slightly to clear the Tdi flywheel
So it's up to you which way you go
Rob
You don't need to use the Tdi starter, you can file down the nose housing slightly to clear the Tdi flywheel
So it's up to you which way you go
Rob