Syncro wheel carrier

[Dazco]

Mods, Ive posted in this section instead of wheels and tires bit as its a bit more syncro specific .
Do these carriers use an internal plate to spread the load ?
http://www.vw-t3-bus-shop.de/eng/syncro ... ction.html" onclick="window.open(this.href);return false;
Thanks
Daz

[armyphil]

Mine does and it looks very similar

[Dazco]

Thanks phil. Ok another question, have you any idea as to how big it or they are, I'm going to be making something very similar. Thanks

[armyphil]

Where do you want measured ?

I've only just put mine back on but I can nip out and take a few for you

[Dazco]

It's just the size of the spreader plate on the inside that I'm curious about. Took lots of pics of the one on jeds at the weekend, didnt get chance to ask about the inner bit

[armyphil]

It's pretty much the outer hinge mirrored on the inside with a brace going to the batt box.

If you are making them you could have them as wide as you wanted to spread the weight of the carrier and wheel

[Dazco]

Thanks mate , should be a piece of pi$$ then, ta

[syncropaddy]

Thanks mate , should be a piece of bog then, ta

Yeah! If it was we'd all be making them ......Just make sure its strong enough and doesn't fall off and kill someone.

[Dazco]

It will be over engineered if anything lol