moving the gearstick

[GringoBingo0711]

Hi guys not sure if this is in the right place or not im looking to move my gearstick back away from te dash by about an inch to accomodate a heqd unit with a flip out screen. I have a transporter 112 panel van.

Thanks in advance
Craig

[GringoBingo0711]

Does anyone know a way of doing it or anything that may help me. Thanks Craig

[AdrianC]

Hi guys not sure if this is in the right place or not im looking to move my gearstick back away from te dash by about an inch to accomodate a heqd unit with a flip out screen.

There's a bit of adjustment to the linkage, back by the gearbox, but if that doesn't help you've got four choices...

- Add a bend to the lever.
- Semi-radical floor & linkage surgery to move the change box backwards on the floor.
- Put the stereo elsewhere, easiest by cutting a slot further over on the dash.
- Give up on the whole plan...

[itchyfeet]

Brickwerks do a short shift kit but out of stock at the moment

http://www.brickwerks.co.uk/index.php/t ... t-kit.html" onclick="window.open(this.href);return false;

[slippy8v]

put a bent gear stick extender on my Komet great job no more scrapped knuckles got it on ebay, just got another for my syncro project this time 8 inch long the seller has different lengths + straight and bent all for VW T4 but the thread is the same as the T25. going to bend the syncro one once i get her on the road.

[itchyfeet]

As it says on the brickwerks link for the short shift kit above if you are scraping your knuckles on the dash then the linkage is worn of the stick bent

[billy739]

set up everything as it should be / once was and there will be no problem

badly adjusted linkage or bent stick is the culprit!