HELP! Trailing arm removal -help needed in Chesterfield

Big lumps of metals and spanners.

Moderators: User administrators, Moderators

Locked
User avatar
Gingermonkey67
Registered user
Posts: 30
Joined: 28 Aug 2011, 20:44
80-90 Mem No: 0
Location: Sheffield, South Yorkshire
Contact:

HELP! Trailing arm removal -help needed in Chesterfield

Post by Gingermonkey67 »

Hi all

I dont know if anyone can offer any help or advice here. My van is needing its drivers side trailing arm replacing, as it has cracks in it. Myself and my mate have started the job at his place in Chesterfield, but we have run into problems getting bolts out etc. We have realised that the job is a bit much for us and I was wondering if anyone knows any VW mechanics that are mobile, and could finish the job?

I have the new trailing arm, with decent bushes fitted already. Also have new bolts, and even a new backplate for the brakes too.

Any help would be very much appreciated !

Thanks

Dave
Bertie is my 1981 Aircooled T25. White in colour, but has been Blue, Black, Silver, Bronze and Brown.
Sheffield, South Yorkshire.

User avatar
Ian Hulley
Registered user
Posts: 12661
Joined: 11 Oct 2005, 08:08
80-90 Mem No: 1323
Location: Wirksworth, Derbyshire ... or at t'mill

Re: HELP! Trailing arm removal -help needed in Chesterfield

Post by Ian Hulley »

There was a mobile VW mechanic in Sheffield area call 'Autohaus Dolby' or something similar.

Hope that helps.

Ian
The Hulley's Bus
1989 2.1DJ Trampspotter
LPG courtesy of Steve @ Gasure

User avatar
Gingermonkey67
Registered user
Posts: 30
Joined: 28 Aug 2011, 20:44
80-90 Mem No: 0
Location: Sheffield, South Yorkshire
Contact:

Re: HELP! Trailing arm removal -help needed in Chesterfield

Post by Gingermonkey67 »

Thanks Ian

I know Autohause Dolby. They have a garage over in the east end of Sheffield where I work. My van went in for a service there when I first bought it. I don't think Matt is a mobile mechanic though.

I just need someone with the know how to be able to remove the main bolts, and get the wheel hub assembly off too. All the bolts are really tight, and we don't have the tools or techniques.

The van can still be made drive able again to get it somewhere nearby if anyone knows of a place that knows the vans?

Cheers
Bertie is my 1981 Aircooled T25. White in colour, but has been Blue, Black, Silver, Bronze and Brown.
Sheffield, South Yorkshire.

jimpainter
Registered user
Posts: 418
Joined: 25 Aug 2009, 06:47
80-90 Mem No: 0
Location: crewe

Re: HELP! Trailing arm removal -help needed in Chesterfield

Post by jimpainter »

The bolts will need to be cut through with a 1mm disc if they are seized solid. The hub bolts are 22mm and can be tight, probably end up needing a brake pipe making up unless it happens to undo ok. May as well replace the wheel bearing as well if there is any problems with it.

Jim
JRP Automotive welding,bodywork, resprays, servicing and repair.
Classic Vw's
Cheshire
07854516387

User avatar
Gingermonkey67
Registered user
Posts: 30
Joined: 28 Aug 2011, 20:44
80-90 Mem No: 0
Location: Sheffield, South Yorkshire
Contact:

Re: HELP! Trailing arm removal -help needed in Chesterfield

Post by Gingermonkey67 »

Yeah, the brake pipe nuts became rounded, and i think it will need a new pipe.

None of the bolts wanted to budge at all. The brake back plate is also really rusty, so I have a new one to fit.
Bertie is my 1981 Aircooled T25. White in colour, but has been Blue, Black, Silver, Bronze and Brown.
Sheffield, South Yorkshire.

gotmeavellegl
Registered user
Posts: 1
Joined: 03 Nov 2011, 21:09
80-90 Mem No: 10432
Location: chesterfield

Re: HELP! Trailing arm removal -help needed in Chesterfield

Post by gotmeavellegl »

hi i can help you out later this week if you still need it doing i'm based at renishaw just off junct 30 m1

cheers phil 07725324188
Last edited by gotmeavellegl on 15 Sep 2013, 18:32, edited 1 time in total.

User avatar
Ian and Lins
Registered user
Posts: 1906
Joined: 27 Apr 2007, 13:18
80-90 Mem No: 3532
Location: Rushden, Northants (God's waiting room)
Contact:

Re: HELP! Trailing arm removal -help needed in Chesterfield

Post by Ian and Lins »

We've used this guy on Lindsay's Skoda. Great service and good price, mobile and he's based in the Chesterfield area. When he found out we had a T25 he was really enthusiastic about working on this sort or vehicle.

Craig Beresford
07546221972

01246 498466
Are we going on anything else?

1985 Petrol 1.9 A/S Hightop

User avatar
Gingermonkey67
Registered user
Posts: 30
Joined: 28 Aug 2011, 20:44
80-90 Mem No: 0
Location: Sheffield, South Yorkshire
Contact:

Re: HELP! Trailing arm removal -help needed in Chesterfield

Post by Gingermonkey67 »

Thanks for all of the replies guys, and the very kind offers of help too.

I have sorted out a solution for it now, so hopefully will be sorted very soon :D

Thanks again!

Dave
Bertie is my 1981 Aircooled T25. White in colour, but has been Blue, Black, Silver, Bronze and Brown.
Sheffield, South Yorkshire.

billy739
Trader
Posts: 2373
Joined: 20 Oct 2005, 10:00
80-90 Mem No: 1541
Location: gloucester

Re: HELP! Trailing arm removal -help needed in Chesterfield

Post by billy739 »

don't forget the 46mm nut as the first job!!!!

Locked