Just getting foam when bleeding a VE pump

Post by **hugomonkey** » 26 Aug 2013, 09:06

im trying to start up an old van ive got standing around and i can just about start it but im getting foam from one of the injectors when im bleeding, only on one and no matter what i do i cant get rid of it, all the other are fine and where easy to bleed??
anyone throw some advice my way

Post by **..lee..** » 26 Aug 2013, 10:02

odd its only on one jase. is the inj pipe holed ??

Post by **protexblue** » 26 Aug 2013, 10:30

Injector could be causing back pressure if dodgy or dirty.

Post by **hugomonkey** » 26 Aug 2013, 11:03

dont think so mate i can try and change it, iwas thinking that there was a bit of an air pocket in the pump as its the highest pipe that has the problem

Post by **hugomonkey** » 26 Aug 2013, 11:04

protexblue wrote:Injector could be causing back pressure if dodgy or dirty.

that wouldnt cause the foaming when im airing out though would it

Club 80-90 Forums

Just getting foam when bleeding a VE pump

Just getting foam when bleeding a VE pump

Re: Just getting foam when bleeding a VE pump

Re: Just getting foam when bleeding a VE pump

Re: Just getting foam when bleeding a VE pump

Re: Just getting foam when bleeding a VE pump