first breakdown

Big lumps of metals and spanners.

Moderators: User administrators, Moderators

Locked
scottbott
Registered user
Posts: 2497
Joined: 07 Jan 2009, 20:36
80-90 Mem No: 6085
Location: Old Somerby,Grantham

first breakdown

Post by scottbott »

it had to happen sometime,flashing red,the temp gauge was in the normal position,stopped twice and topped up water,all well for a while then flashing red light,crawled under van and noticed coolant on the right hand bottom of van.I saw a drop of coolant leak and found that it was leaking at the hose/plastic pipe join,the clamp looked iffy and I only had a multi tool with me.the wife said ring the breakdown cover that comes with the insurance,a repairman came within 30 minutes,I told him the problem he changed the hose clamp,I topped up with coolant and drove 107 miles back no problem,will get the van on the hoist at work and check the hose clamps and the hoses as well,does anyone do silicone hoses for these engines?
Nil carborundum illegitimi

User avatar
keytouch
Registered user
Posts: 952
Joined: 17 Oct 2007, 22:31
80-90 Mem No: 4484
Location: West Somerset

Re: first breakdown

Post by keytouch »

What engine you got?
Jonathan

A Camper called Wanda
1983 A reg Bilbo Marlfield conversion, 1900 Diesel 1Y engine

scottbott
Registered user
Posts: 2497
Joined: 07 Jan 2009, 20:36
80-90 Mem No: 6085
Location: Old Somerby,Grantham

Re: first breakdown

Post by scottbott »

1.9 DG
Nil carborundum illegitimi

waltraud
Registered user
Posts: 716
Joined: 27 Aug 2008, 12:59
80-90 Mem No: 5824
Location: London

Re: first breakdown

Post by waltraud »

I have a dg and I dont think there are full sets but fir eg yoy can get the long front to bavk pipes in stainkess and use sikicon in 32 or 38 mm deoending if esy or late and buy hose connectirs to match. I tjink hoseworld.com wad quite good.
1983 1.9 Ivory Westy Joker

Ralf85
Registered user
Posts: 4447
Joined: 13 Jan 2010, 12:42
80-90 Mem No: 4418
Location: West London - 1985 westie pop top, LHD, 1900 DF engine

Re: first breakdown

Post by Ralf85 »

Glad you got home okay mate. I had the pipes on my DF engine replaced with stainless steel ones from Brickwerks. The mild steel ones were completely knackered. I actually got the new hose to connect up the return pipe from (don't tell anyone) JK. It was decent quality. Don't know if they still have them.
:)

User avatar
Oldiebut goodie
Registered user
Posts: 7502
Joined: 18 Apr 2008, 01:19
80-90 Mem No: 11135
Location: Eastern Angle

Re: first breakdown

Post by Oldiebut goodie »

waltraud wrote:I have a dg and I dont think there are full sets but fir eg yoy can get the long front to bavk pipes in stainkess and use sikicon in 32 or 38 mm deoending if esy or late and buy hose connectirs to match. I tjink hoseworld.com wad quite good.

I think you need to shave your finger tips down a tad! :lol:
1.6D 2019 VW T-Cross
200hp VW T6
1̶Y̶ ̶1̶9̶8̶7̶ ̶H̶i̶-̶t̶o̶p̶ ̶C̶a̶r̶a̶v̶e̶l̶l̶e̶
5̶0̶8̶d̶ ̶M̶e̶r̶c̶

Locked