Cylinder head removal

[Richiekook]

Hi guys,

Right, we have just "invested" in a 1983 t25 wedge 1.6 straight diesel. Unfortunately the head gasket has gone.....don't ask! My other half has gone to work and mentioned it would be a good idea to remove the cylinder head so we can get it pressure tested. Problem is, although I service my T4 and change brake pads etc i have never removed a cylinder head myself. Can any one help me with my starting point?

Thanks in advance

Emmah
Richie's blonde damsel in distress!

[dave friday]

Hi,look for a post in "any other matters" by "Oldie but goodie" and look through the manual .
Your main problems will be removing the camshaft gear wheel and maybe the exhaust manifold studs.
Just come back if you get stuck.
Good luck.
Ps put your location up.

[Richiekook]

Thanks, I have already found issues with the manifold head bolts. Haha, a few choice words were invented. I will keep looking. Don't seem to be able to get hold of a manual for this engine. Always the td one I seem to find or the petrol.

[dave friday]

Just kampers do a booklet style one