CV Joint boots
Moderators: User administrators, Moderators
- syncropaddy
- Registered user
- Posts: 887
- Joined: 17 Oct 2005, 22:46
- 80-90 Mem No: 1019
- Location: Gorey, Co. Wexford, Ireland
CV Joint boots
I was dropping the engine and box out of the Syncro today and I noticed that the CVJ boots were split on all four rear joints, one front outer and both front inners! These were all fitted just before Syncro25 and were the Spidan brand!
Utter shoite!
Utter shoite!
syncropaddy
One Syncro, five Mercedes Benzs and a rocket ship
One Syncro, five Mercedes Benzs and a rocket ship
- jebiga41
- Trader
- Posts: 757
- Joined: 15 Mar 2008, 15:50
- 80-90 Mem No: 5654
- Location: dublin ireland
- Contact:
Re: CV Joint boots
Well at least you won't be bored for the next while 

VW T3/T25 and Syncro Gearbox rebuilds
http://vantopia.ie
http://vantopia.ie
- toomanytoys
- Trader
- Posts: 2870
- Joined: 11 Oct 2005, 18:37
- 80-90 Mem No: 41
- Location: Boston area, South Lincolnshire
Re: CV Joint boots
Yeah.. my rear ones look shabby.. not split yet.. but wont be long I expect.. 3 years just isn't good....
I have a set of old ones in a box somewhere.. hope I didn't throw them out.. they were in great condition.....

I have a set of old ones in a box somewhere.. hope I didn't throw them out.. they were in great condition.....
Re: CV Joint boots
I was dropping the engine and box out of the Syncro today and I noticed that the CVJ boots were split on all four rear joints, one front outer and both front inners! These were all fitted just before Syncro25 and were the Spidan brand
...but then, 65 mph through that forest track when we came over, oh and the subsequent 4-wheel lockup for 20 yards didn't play a part?
Joie de vivre I believe it's called.

The 80-90 Tech Wikipedia Your 1st port of call

1.9TD Syncro Doka / Syncro Kastenwagen / 16" Kombi Camper
Syncronaut No. 1
- syncropaddy
- Registered user
- Posts: 887
- Joined: 17 Oct 2005, 22:46
- 80-90 Mem No: 1019
- Location: Gorey, Co. Wexford, Ireland
Re: CV Joint boots
HarryMann wrote:I was dropping the engine and box out of the Syncro today and I noticed that the CVJ boots were split on all four rear joints, one front outer and both front inners! These were all fitted just before Syncro25 and were the Spidan brand
...but then, 65 mph through that forest track when we came over, oh and the subsequent 4-wheel lockup for 20 yards didn't play a part?
Joie de vivre I believe it's called.
I've only done about 15,000 kms since then ....... rubbish quality. I did keep some of the old ones so I can see those ones going back on!
syncropaddy
One Syncro, five Mercedes Benzs and a rocket ship
One Syncro, five Mercedes Benzs and a rocket ship
- jebiga41
- Trader
- Posts: 757
- Joined: 15 Mar 2008, 15:50
- 80-90 Mem No: 5654
- Location: dublin ireland
- Contact:
Re: CV Joint boots
Was there not some discussion before about getting alternative boots made of silicon?
VW T3/T25 and Syncro Gearbox rebuilds
http://vantopia.ie
http://vantopia.ie
- ..lee..
- Registered user
- Posts: 736
- Joined: 04 Jun 2006, 22:13
- 80-90 Mem No: 4478
- Location: llanelli, s wales
Re: CV Joint boots
I've had same
. Next time I'm going to head in the baja bug racer style boots. Hope they last longer.
Lee

Lee
-
- Registered user
- Posts: 1931
- Joined: 21 Feb 2012, 21:47
- 80-90 Mem No: 0
- Location: lancaster uk
Re: CV Joint boots
Had the same issue myself with lobro gkn boots off mr b...only did 18 months then really cracked...so this time got real vw one...might still fail but as they have a 2 year warranty I will be slinging them back at vw...twice as expensive of course!
-
- Trader
- Posts: 3117
- Joined: 08 Oct 2005, 19:36
- 80-90 Mem No: 1
- Location: Huddersfield, WeYo.
- Contact:
Re: CV Joint boots
Your comments have been forwarded to GKN.
Disappointing for us, seems your not alone, we've had some other feed back about them too.
We know about it and are looking into it.
I enquired about using a "fast" boot but they won't work at the angles we want, also been looking for a thermoplastic boot but there isn't one the right dimensions, GKN suggested a few boots quite near but not near enough.
We'll look for another brand until GKN tell us what's going on with them.
I have a sneaky suspicion that one of the ingredients that go into making the rubber has been outlawed or something and the replacement just doesn't cut It.
Anyway, I've mentioned this to them before and I've forwarded the above to them, if they come back with anything remains to be seen.
Disappointing for us, seems your not alone, we've had some other feed back about them too.
We know about it and are looking into it.
I enquired about using a "fast" boot but they won't work at the angles we want, also been looking for a thermoplastic boot but there isn't one the right dimensions, GKN suggested a few boots quite near but not near enough.
We'll look for another brand until GKN tell us what's going on with them.
I have a sneaky suspicion that one of the ingredients that go into making the rubber has been outlawed or something and the replacement just doesn't cut It.
Anyway, I've mentioned this to them before and I've forwarded the above to them, if they come back with anything remains to be seen.
-
- Registered user
- Posts: 1931
- Joined: 21 Feb 2012, 21:47
- 80-90 Mem No: 0
- Location: lancaster uk
Re: CV Joint boots
Your probably right and I don't in any way hold you responsible...I'm not the sort to twine about about something that's out of your control and but glad you are giving gkn some grief about it non the less..whether the vw ones will last any better I dunno but may even be older stock...I got those in rush anyway for s/p and wouldn't think twice aboutbchuckingbthem back at vw as the prices are obviously inflated unlike your reasonable ones.
Better stop, my tounge s getting brown!..
Better stop, my tounge s getting brown!..
- axeman
- Registered user
- Posts: 1247
- Joined: 07 Feb 2009, 19:50
- 80-90 Mem No: 6410
- Location: Smeeth kent country side
Re: CV Joint boots
while we are on the subject of cv joints, dose any know where i can source new the front inner bolts?
they are a couple of mm longer than the ones used on the rears to compensate for the spacer between the joint and the diff.
thanks neil
they are a couple of mm longer than the ones used on the rears to compensate for the spacer between the joint and the diff.
thanks neil
Back in the game with an uncut 2wd panel van
-
- Registered user
- Posts: 1931
- Joined: 21 Feb 2012, 21:47
- 80-90 Mem No: 0
- Location: lancaster uk
Re: CV Joint boots
I think mr b does them...or use 100mm cv joint one from a golf etc.
- syncropaddy
- Registered user
- Posts: 887
- Joined: 17 Oct 2005, 22:46
- 80-90 Mem No: 1019
- Location: Gorey, Co. Wexford, Ireland
Re: CV Joint boots
axeman wrote:while we are on the subject of cv joints, dose any know where i can source new the front inner bolts?
they are a couple of mm longer than the ones used on the rears to compensate for the spacer between the joint and the diff.
thanks neil
Yes. Mercedes W124 CVJ bolts are identical to the inner fronts. Its the one on the left!

Might be a time to see what VW themselves have to offer and if all fails I'll try Merc/BMW etc
syncropaddy
One Syncro, five Mercedes Benzs and a rocket ship
One Syncro, five Mercedes Benzs and a rocket ship
- syncropaddy
- Registered user
- Posts: 887
- Joined: 17 Oct 2005, 22:46
- 80-90 Mem No: 1019
- Location: Gorey, Co. Wexford, Ireland
Re: CV Joint boots
syncropaddy wrote:
Might be a time to see what VW themselves have to offer and if all fails I'll try Merc/BMW etc
Well I did that ......
........ waste of time!
syncropaddy
One Syncro, five Mercedes Benzs and a rocket ship
One Syncro, five Mercedes Benzs and a rocket ship