oil pressure and water temp gauge group buy?

[axeman]

as per the title found this lot on ebay could work out as a cheap buy, i would be wanting one of each,

is any one interested?
http://www.ebay.co.uk/itm/VDO-Oil-Press ... 16b&_uhb=1" onclick="window.open(this.href);return false;

http://www.ebay.co.uk/itm/VDO-Temperatu ... 167&_uhb=1" onclick="window.open(this.href);return false;


neil

[v-lux]

I'd have a water temp one.

[Aidan]

oil pressure please - do they come with senders ?

[jebiga41]

I'll take two water and one oil

[axeman]

oil pressure please - do they come with senders ?

no just the gauges,

neil

[bikermike87]

I tried reading the thread on gauges, but got lost.

I really want oil pressure, temp and water temp, but don't have a clue where to start.

[silverbullet]

I'm in for 3 of each. Temp scales are more suitable than the Golf/Audi ones, that read 170*C full scale for oil

[KINGPRAWN]

I have just fitted a golf/Audi trio of gauges ,and since fitted a lower than 170deg oil temp gauge(120) which looks just like these ones. The only problem with them is the illumination . The golf ones are orange/red and bright ... Nice! But there are barely lit at all even with the brightest bulb I could get, also they have a very bulky build holder that was too long for my pod so had to wangle a bulb holder in.

[hugomonkey]

nice tip that just bought a few boxes
any idea where to get the senders cheap??

[Dai]

I'll have two of each please Neil

[hugomonkey]

anyone had any experience with the cheaper oil pressure senders?? i would rather be paying 15-20 quid instead of 50

[Dazco]

Ill have one of each

[xriss]

if anybodys interested having a clear out and surpluss to requirements


Gauge pod kit consisting of
EGT
OIL temp
OIL pressure
Turbo boost pressure
Perfect for a tdi conversion comes with binnacle in brown or black (led housed where heated seat switch would go... factory look) your choice and brain (slightly larger than a pack of 20 ciggs) so nice n compact, also audible speaker set your chosen parameters
And if exceeded you will be notified with a buzzzzzz, joystick for scrolling between readings, i would say best left showing all four readings
Uncompleted project and 98% there you will have to run wiring from engine bay if fitting to a t3
All brand new and high quality sensors from the good old USA will take £250 (basically cost) plus £10.00 postage
Note: some fettling with plexy plastic will have to be done to fill 3mm each side of led display ,see pictures to determine how /what best to infill with, a model shop will have what’s required....penny’s.. Cheers all

[axeman]

i have emailed the seller with a couple of questions as soon as he gets back to me i will answers my questions.

neil

[KarlT]

Interested in 2 of each but what about senders. cost & where would you get them? Cheers