ABS Syncro information required

Syncro 4&4 Discussion and Q&A last answered over 2 years ago.
You may also want to visit the Wiki(pedia) for a more structured index of T25 repair, maintenance, technical and ownership topics (browse for Syncro links)

You can find further syncro specific information on the Syncronauts website.

Moderators: User administrators, Moderators

Locked
User avatar
Aidan
Trader
Posts: 7068
Joined: 11 Oct 2005, 19:21
80-90 Mem No: 742
Location: Llanfyllin, mid Wales : )
Contact:

ABS Syncro information required

Post by Aidan »

I've got a customer's van in for a gearbox job, it's a non locker and we're converting the gearbox to difflock, Jason has supplied the necessary loom stuff and I have the difflock diff and case, so far so good, straightforward, BUT I've just discovered the bus has the rare ABS factory fitted so I'm wondering how the two systems are interlocked

so if anyone has any wiring diagram for the abs system, the VW manual for the ABS system or any other useful information please let me know as Bentley doesn't seem to cover it at all - least not the paper one, I haven't checked the pdf version yet.

our colleagues over the pond especially may have the technical information, please do share it, thanks :ok

User avatar
ninja.turtle007
Registered user
Posts: 2234
Joined: 04 Jun 2009, 16:07
80-90 Mem No: 7278
Location: Surrey

Re: ABS Syncro information required

Post by ninja.turtle007 »

I have abs and a front locker. I there is anything I can shine my torch on or take a picture of let me know.
Full time Explorer http://www.resfeber.co.uk

User avatar
toomanytoys
Trader
Posts: 2870
Joined: 11 Oct 2005, 18:37
80-90 Mem No: 41
Location: Boston area, South Lincolnshire

Re: ABS Syncro information required

Post by toomanytoys »

I seem to remember reading a long time ago that ABS doesnt work in G and if a difflock is actuated.. (G could be speed related tho.. most ABS dont work at low speed.)
so I would assume there are 2 switches (switch modes) gear lever and any of the difflock lights..
Pulling the fuse would dissable abs, so assume there would be a relay or 2 that drops power to the ABS unit..
Of course.. there could be a clever input signal for the ABS ECU that tells it not to operate rather than just dropping the power to it..

Does Ekta list any special parts??

User avatar
xriss
Registered user
Posts: 479
Joined: 11 Oct 2005, 17:14
80-90 Mem No: 1926
Location: uk

Re: ABS Syncro information required

Post by xriss »

did i not send you all the abs bumff a while back aiden?
80-90 Mem#:1926
Syncronaut Mem#:66

User avatar
Aidan
Trader
Posts: 7068
Joined: 11 Oct 2005, 19:21
80-90 Mem No: 742
Location: Llanfyllin, mid Wales : )
Contact:

Re: ABS Syncro information required

Post by Aidan »

xriss wrote:did i not send you all the abs bumff a while back aiden?

not sure about that I'll have a trawl of my emails cheers, Aidan :)

User avatar
syncroandy
Trader
Posts: 1913
Joined: 18 Oct 2005, 18:15
80-90 Mem No: 851
Location: North Lancs. UK
Contact:

Re: ABS Syncro information required

Post by syncroandy »

Just seen this Aidan, you're probably sorted now but if not let me know, got all the diagrams here. You want No. 60.

Not looked at it before, so was interested to note that ABS on vehicles with 4x4 features a 'warning buzzer for excess road speed' :shock: Maybe there's a few on here that could do with one of those :lol:
Syncrosport (taking a break as of summer 2024)
Volkswagen Transporter, reloaded.

252 GC5 EJ25 AAN L90D

User avatar
Aidan
Trader
Posts: 7068
Joined: 11 Oct 2005, 19:21
80-90 Mem No: 742
Location: Llanfyllin, mid Wales : )
Contact:

Re: ABS Syncro information required

Post by Aidan »

Andy
no I haven't got the info YET so please let me have it, cheers

max and caddy
Registered user
Posts: 1931
Joined: 21 Feb 2012, 21:47
80-90 Mem No: 0
Location: lancaster uk

Re: ABS Syncro information required

Post by max and caddy »

Where's this buzzer at then? Not showing it on my diagram 60...edition 09.87..

User avatar
syncroandy
Trader
Posts: 1913
Joined: 18 Oct 2005, 18:15
80-90 Mem No: 851
Location: North Lancs. UK
Contact:

Re: ABS Syncro information required

Post by syncroandy »

Aidan, you have an email.

Alex, yup its deffo there in diagram number 60, on page 2, 'H10 - Warning buzzer for excess road speed (4x4 only) A-pillar, left, near relay plate

My version is 'Anti-lock brake system (ABS), (4x4 vehicles only), from July 1987' Edition 12.90
Syncrosport (taking a break as of summer 2024)
Volkswagen Transporter, reloaded.

252 GC5 EJ25 AAN L90D

max and caddy
Registered user
Posts: 1931
Joined: 21 Feb 2012, 21:47
80-90 Mem No: 0
Location: lancaster uk

Re: ABS Syncro information required

Post by max and caddy »

Definately not on my earlier CFD....must of been an revision on the later models...will show you and you can send it to Aidan if he wants it...no scanner y see...

Locked