H6 3.0L Subaru into a Syncro

[sunburntwilly]

Hi all just like some advise on putting a H6 sub motor into my Syncro Doka.
My biggest concern is ground clearance. I have seen some conversions on the net and it looks like they hang
Very low to me or lower then the wbx.
Any advise would be great thank you
Bob.

[g60steve]

http://www.thesamba.com/vw/forum/viewto ... 30d7ee4090" onclick="window.open(this.href);return false;

Type SVX Vanagon Syncro into Google for more.

[Allanw]

If you're talking about the EZ engines, here is a good Samba thread http://www.thesamba.com/vw/forum/viewtopic.php?t=490057

I currently have an EJ25, and very nearly sold that, to complete an EZ30 or EZ36 swap. The sump can be shortened a bit on the EZ30 too (fit a flat plate), but I think it still hangs a bit lower than a WBX. I think the exhause was the lowest spot on the WBX anyway wasn't it?

[sunburntwilly]

Thanks for links they do sit low. Defeats the purpose of having a great little off roader then ham stringing it with a over hung motor.
Need more research.
I do want more power though.
Thanks again.
Bob.

[g60steve]

No ground clearance issues when fitted with a shortened sump.
http://transporterwerks.com/services/su ... nversions/" onclick="window.open(this.href);return false;

[sunburntwilly]

Thanks Steve good link