Removal of T3 Westie roofrack?

[Clydebuilt]

Hi,
Can anyone advise me how to remove the cab roofrack on my '87 Westfalia?
I'm replacing the old seal - the seal from the pop-top is off but the 4 x screws which hold on the roofrack is proving impossible to remove - the 4 x brass screws/pins at the back of the roofrack casing are also impossible to remove.

Any advice is appreciated!
Clydebuilt

[jamesc76]

Sorry, i dont know, but are they phillips head screws?? if so cut a slot in them and use a flat screw driver

[Ian Hulley]

*sniggers*

[Plasticman]

Sorry, i dont know, but are they phillips head screws?? if so cut a slot in them and use a flat screw driver

stihl but put the proper blade in it
mm

[Plasticman]

back to your rack a picky would cheer us all up and make sure were all working from the same sheet i overheard this office speak a moment ago,,, anyhow are the screw going through the cab roof, if so then just drop the lining and get to them
mm

[Clydebuilt]

To jamesc76,
They are flat head screws which won't turn when using a big flat screw driver. Have been advised to try heating the screwhead (with a hairdrier) then squirting in WD40 - no luck!
To metalmick8y,
Camera is broken, sorry no pics. The 4x screws(one on each side of r-rk) don't go through cab roof.