Paint Suitable For DIY Use

Thin bits of metal and bright blue light.

Moderators: User administrators, Moderators

Locked
Wookster
Registered user
Posts: 8
Joined: 13 Jul 2012, 19:54
80-90 Mem No: 0
Location: Ammanford, S Wales

Paint Suitable For DIY Use

Post by Wookster »

Hi Folks,

Started work on my camper conversion and have purchased a rattle can of weld through primer for where it's needed, but nothing else so far in term of paint. The work is going to take a while so I need to prime and maybe topcoat as I go, just to seal everything.

Rustoleum is obviously an option but what else is suitable, and are there advantages in terms of application and finish.
I have a mask suitable for spraying but wish to avoid 2K or anything else which contains nasty stuff, needs an oven etc.

I'm reading loads of build topics and have read about epoxy primer, but is it suitable for all top coats.
Apart from spraying celulose years ago I'm a complete novice in this area so any advice appreciated.

Cheers

Andy

Jonnyb416
Registered user
Posts: 965
Joined: 17 Feb 2011, 22:07
80-90 Mem No: 9259
Location: Wigan

Paint Suitable For DIY Use

Post by Jonnyb416 »

I've used red oxide on all the work I've completed so far and my van ain't going to be ready for sometime. Seems to have protected well enough 12 months on. Jon.
1982 Diesel hightop. 1Y engine. Still work in progress but running and taking us on holidays.

boatbuilder
Registered user
Posts: 804
Joined: 09 Aug 2009, 21:53
80-90 Mem No: 8265
Location: County Monaghan, Ireland

Re: Paint Suitable For DIY Use

Post by boatbuilder »

Epoxy primer is good stuff, totally waterproof.
You can spray it, roller it (if you can find rollers that the solvent won't attack) or you can get it in aerosol cans now too, which last about 4 days after you press the mixing button.
If you let it cure fully, you have to sand it to give the topcoat a grip.
1984 1.9D (AEF Code) T25 tintop

jimpainter
Registered user
Posts: 418
Joined: 25 Aug 2009, 06:47
80-90 Mem No: 0
Location: crewe

Re: Paint Suitable For DIY Use

Post by jimpainter »

Jonnyb416 wrote:I've used red oxide on all the work I've completed so far and my van ain't going to be ready for sometime. Seems to have protected well enough 12 months on. Jon.

Red oxide isn't waterproof though incase its out in the rain. Its had all the lead removed due to health and safety
JRP Automotive welding,bodywork, resprays, servicing and repair.
Classic Vw's
Cheshire
07854516387

Wookster
Registered user
Posts: 8
Joined: 13 Jul 2012, 19:54
80-90 Mem No: 0
Location: Ammanford, S Wales

Re: Paint Suitable For DIY Use

Post by Wookster »

Thanks for the replies.
The old bus is in the garage but with all the rain and humidity anything unprotected still goes slowly rusty.
Had to take the pop top off and let the tyres down to get it in, so it won't be outside for long periods.
Maybe red oxide will last long enough. Going to research the h&s side of epoxy primer this evening.
Anybody know what the primer you get in a rattle can is?, or can you buy weld through stuff in bulk.

Jonnyb416
Registered user
Posts: 965
Joined: 17 Feb 2011, 22:07
80-90 Mem No: 9259
Location: Wigan

Re: Paint Suitable For DIY Use

Post by Jonnyb416 »

jimpainter wrote:
Jonnyb416 wrote:I've used red oxide on all the work I've completed so far and my van ain't going to be ready for sometime. Seems to have protected well enough 12 months on. Jon.

Red oxide isn't waterproof though incase its out in the rain. Its had all the lead removed due to health and safety
oh yeah forgot to mention my vans in a garage. I vactan it first then red oxide. When/if the time comes to paint I will sand down, possibly vactan again then roller!
1982 Diesel hightop. 1Y engine. Still work in progress but running and taking us on holidays.

Locked