DEVON R&R HINGES

Post by **OLD ONE** » 14 Aug 2006, 16:11

Again, looked in Wiki, cant find info.
I am trying to fit these hinges. The gent I purchased them from left One connected to seat section and explained how to fit the whole thing together. It just don't work out.!!!
Has any one got any pics, diagrams. instructions??? Any thing to give me an idea on how they go.
TIA

Post by **ermie571** » 14 Aug 2006, 19:09

hello mate,

are devon r&r any different to ordinary rnr?

we have just put one in the panel van....but the bed was made up, and only required bolting onto the base. What surprised me was the angle the hinges attached to the base at - i kinda expected it to be level, but it aint.

I have some plans sent to me by another member on a previous thread...could try searching for it, or let me know and I will try and send the ones I have to you. Thought they were on the wiki, though...

can try and do piccies if you need them

Emma

Post by **OLD ONE** » 14 Aug 2006, 19:44

Hi

"are devon r&r any different to ordinary rnr?" You ask

Depends on ordinary. They are not the same as JKs hinges. I am not sure about any others.
If you can do some Pics. It would give me some ideas.
If it is better for you ,you can Email them to

bobtidy@talktalk.net

Cheers Mate

Post by **Don-Tucker** » 14 Aug 2006, 20:33

I'll send you what i have Bob.
Don

Post by **OLD ONE** » 14 Aug 2006, 20:37

Thanks Don. Just want to get idea how they fit Etc.

Post by **OLD ONE** » 14 Aug 2006, 20:51

Thanks Don, got the pics OK. I think they are JKs hinges. But it gives me somthing to work to.
Cheers Mate

Post by **Don-Tucker** » 14 Aug 2006, 21:04

I knew they weren't the ones you were talking about Bob,but i hoped they will be of some use.
Don