Good used front diff, came into me minus some difflock parts, otherwise complete, with VC
I have done a partial strip down / inspection of this front diff and replaced the missing difflock parts ( the pin, sleeve and rollpin had been previously removed) Pin I had in stock (front diff pin hard to find now) has slight damage which doesn't stop it working at all and is mated to a very excellent used alloy sleeve and a new rollpin was fitted
Backlash is bang on, no play in pinion bearing, no roughness in input bearings, spigot bearing good, VC appears to be good, no blown seals no silicon in the oil residues and no wear on the splines, oil was clean had obviously been previously replaced. Oil seal faces of output flanges good and no signs of weepage at the seals. Speedo drive works fine, 19/8 original fitment for 185R14Cs or 7.00R16s, code B
VC has only been tested static on bench at 10/12 degrees ambient temp - ~74Nm can be turned by hand, and that's about where it should be, but there's no way of knowing without testing it in a vehicle, but I'd expect it to be right to slightly tight, but there's no fully documented mileage info about it, no numbers on the VC; diff is a 1986 made one, fairly early serial number
Comes complete with difflock activation tell tell switch and a pair of spacer rings for the flanges but no external difflock parts, just needs oil and fitting
7/34, 4.86 final drive ADH code, matches AAN and AVN locking gearboxes, AAK and AVV non lockers
£625, 12 month warranty on diff, no warranty on VC
exchange deal possible - fitting service available
Front Diff for Sale, ADH, 4.86, locker
Moderators: User administrators, Moderators