how much thread?
Moderators: User administrators, Moderators
-
dave lfc
- Registered user
- Posts: 372
- Joined: 27 Nov 2010, 12:14
- 80-90 Mem No: 9021
- Location: liverpool
how much thread?
just fitted some spacers to my van and noticed i am only getting 3/4s of an inch of bolt through the wheel.is this enough thread to go into the hub or should there be more,cheers dave
its better to burn out than to fade away 1.9 dg petrol transporter1988
-
California Dreamin
- Registered user
- Posts: 2673
- Joined: 03 Apr 2007, 12:54
- 80-90 Mem No: 8386
- Location: Nottingham
Re: how much thread?
Whats that in full turns of the nuts?
7 -8 or more full turns should be safe enough.
But then 3/4 of an inch is approximately 20mm and at 1.5? thread pitch that should be around 12 - 13 turns? plenty.
Martin.
7 -8 or more full turns should be safe enough.
But then 3/4 of an inch is approximately 20mm and at 1.5? thread pitch that should be around 12 - 13 turns? plenty.
Martin.
1989 California 2.1MV