just had a repair....
Moderators: User administrators, Moderators
-
- Registered user
- Posts: 82
- Joined: 10 Apr 2011, 21:22
- 80-90 Mem No: 12447
- Contact:
Re: just had a repair....
right im off to see the garage! wish me luck
1982 Panel Van, 2.2 scoob, Porsche 996 brakes, Air ride probably never coming soon!
-
- Registered user
- Posts: 82
- Joined: 10 Apr 2011, 21:22
- 80-90 Mem No: 12447
- Contact:
Re: just had a repair....
well....it didn't go well surprise surprise.
to summarise they did offer to pay a quarter of the cost I paid to them, at that point I was so annoyed I told them to stick it.
Their defence was,
"I told them to use what they liked of the panels.."- if I did I cant remember saying that and if I did, I meant they didn't have to weld in the whole corner! I definitely didn't mean chop it in the middle of the panel so it ruins the whole thing!
"the panels they put in, which I gave them were bent so that's why its all bent" - well I know they weren't bent they were straight as hell and if it was bent id expect a phone call to say hey man this panel is bent you sure you want us to put it in?
I told them I was restoring my van bit by bit and hated the fact it had previously bodged work that was covered in filler, that's why I had the massive panels.
etc etc
Oh and to add insult to injury they asked me if I wanted to fill some small holes in the rear that they found whilst taking the bumper off I said yes please- it will be extra!!!, when I look at what they have done !!!! man they just covered with a plate and left the hole! with rust and all!!
Man these guys SUCK

to summarise they did offer to pay a quarter of the cost I paid to them, at that point I was so annoyed I told them to stick it.
Their defence was,
"I told them to use what they liked of the panels.."- if I did I cant remember saying that and if I did, I meant they didn't have to weld in the whole corner! I definitely didn't mean chop it in the middle of the panel so it ruins the whole thing!
"the panels they put in, which I gave them were bent so that's why its all bent" - well I know they weren't bent they were straight as hell and if it was bent id expect a phone call to say hey man this panel is bent you sure you want us to put it in?
I told them I was restoring my van bit by bit and hated the fact it had previously bodged work that was covered in filler, that's why I had the massive panels.
etc etc
Oh and to add insult to injury they asked me if I wanted to fill some small holes in the rear that they found whilst taking the bumper off I said yes please- it will be extra!!!, when I look at what they have done !!!! man they just covered with a plate and left the hole! with rust and all!!
Man these guys SUCK

Last edited by Paul_Van_Denton on 14 Oct 2013, 14:07, edited 1 time in total.
1982 Panel Van, 2.2 scoob, Porsche 996 brakes, Air ride probably never coming soon!
- lloydy
- Registered user
- Posts: 8015
- Joined: 24 Nov 2009, 17:54
- 80-90 Mem No: 5262
- Location: cheam surrey
Re: just had a repair....
Sorry to hear that, things can only get better from now on. A general rule of thumb for me is that if the company spell words wrong.. Like "kool" "skool" then keep away.
Time is a drug. Too much of it kills you
- 1664
- Registered user
- Posts: 8746
- Joined: 30 Mar 2006, 15:20
- 80-90 Mem No: 3299
- Location: Coventry Member
Re: just had a repair....
Looks like they put as much effort into their business cards as they did your van.
Looks like you're going to have to put this one down to experience. You can of course share experiences with other VW forums
Looks like you're going to have to put this one down to experience. You can of course share experiences with other VW forums

Vorsprung Durch Technik my ar$e!
Re: just had a repair....
1664 wrote:Looks like you're going to have to put this one down to experience.
I can't believe that has to be the end of it. I think you could benefit from some proper legal advice to know where you stand. Citizen's Advice Bureau might be a good place to start. I'm a member of Which? Legal Services, and they've been invaluable to me on a couple of occasions to help me understand my consumer rights and to help me with what to write in a formal letter - they were instrumental in getting my car insurance company to cough up around £1000 on one occasion after my car was broken into, so I'm quids in on the membership

"I'm a man of means, by no means....King of the Road!"
1983 Viking Xplorer, 2.1DJ
1983 Viking Xplorer, 2.1DJ
-
- Registered user
- Posts: 82
- Joined: 10 Apr 2011, 21:22
- 80-90 Mem No: 12447
- Contact:
Re: just had a repair....
Some more for the complete picture.





Hi CJH,
Yeah that is a good idea, I did have it suggested to me that I should speak to a lawyer, maybe that is a cheaper route.
thank you.





Hi CJH,
Yeah that is a good idea, I did have it suggested to me that I should speak to a lawyer, maybe that is a cheaper route.
thank you.
1982 Panel Van, 2.2 scoob, Porsche 996 brakes, Air ride probably never coming soon!
- Dazco
- Registered user
- Posts: 2297
- Joined: 18 Dec 2011, 15:44
- 80-90 Mem No: 10544
- Location: Sheffield. 1984 autosleeper trooper. 1.9 petrol called Jambo
Re: just had a repair....
I'm not a professional welder not even a very good amateur but what they have done is just plain and simple , "pooh". Sorry that you have had to find out the hard way though . It must be harder to weld a panel in badly than it is to do it properly. As for covering holes that's just cowboy work. Hope you get summet sorted with the rest of the van. Daz
Auto sleeper fitted with EJ 20 subaru lump
-
- Registered user
- Posts: 784
- Joined: 11 Jun 2010, 12:56
- 80-90 Mem No: 8585
- Location: Worthing
Re: just had a repair....
Ask them for a receipt. If they say no because it was cash etc, then tell them you'll ring Hmrc. I know someone who did this and they suddenly caved in.
A bit underhand I know, but you've been tucked up nicely.
Good luck
A bit underhand I know, but you've been tucked up nicely.
Good luck

-
- Registered user
- Posts: 82
- Joined: 10 Apr 2011, 21:22
- 80-90 Mem No: 12447
- Contact:
Re: just had a repair....
yeah I know I would of done better myself! oh well you lives and learns I guess
1982 Panel Van, 2.2 scoob, Porsche 996 brakes, Air ride probably never coming soon!
-
- Registered user
- Posts: 219
- Joined: 06 Sep 2013, 18:58
- 80-90 Mem No: 12833
- Location: East Lothian
Re: just had a repair....
Pay a visit to your local CAB for further advice. You can persue them through a small claims court. I haven't done it myself but I believe that it is relatively easy and not to expensive if you do it yourself. The CAB will point you in the right direction.
1991 2.1 WBX Devon microbus twinslider hightop
- New Kentish Campers
- Registered user
- Posts: 1739
- Joined: 12 Oct 2010, 06:16
- 80-90 Mem No: 8994
- Location: Near Linton, Kent.
- Contact:
Re: just had a repair....
Beggars belief, doesn't it?
Old Skool? .... Old Sh_t would be more appropriate.
Best of luck anyway, in whatever you end up doing
Old Skool? .... Old Sh_t would be more appropriate.

Best of luck anyway, in whatever you end up doing

-
- Registered user
- Posts: 804
- Joined: 09 Aug 2009, 21:53
- 80-90 Mem No: 8265
- Location: County Monaghan, Ireland
Re: just had a repair....
Send them a well-worded letter with what you want them to do to rectify the situation.
Include a bit about what you will do if they don't play ball.
Putting stuff in writing usually does the trick.
Include a bit about what you will do if they don't play ball.
Putting stuff in writing usually does the trick.
1984 1.9D (AEF Code) T25 tintop
-
- Registered user
- Posts: 671
- Joined: 01 Feb 2010, 10:23
- 80-90 Mem No: 7803
- Location: birmingham
Re: just had a repair....
hi dude they were going the easy route,bodge it and take ya money.the van was probably your pride and joy i know mine is.Personally id get in touch with trading standards get them involved its amazing what a man in a suit can achieve.Good luck with whatever ya decide.